P ualtek Q P C 25Watts Single Output QPD-25 Series Electronics Corporation Features: Universal AC input/ Full range No Load Power Consumption <0.5W Wide Operating Ambient Temperature (-25C~70C) High Efficiency, and High Reliability Output Protections: OLP/OVP/SCP All using 105C long life electrolytic capacitors. 100% full load burn-in test PCB soldering side with conformal coating CB Model QPD-25-3.3 QPD-25-5 QPD-25-12 QPD-25-15 QPD-25-24 Output Characteristics DC Output 3.3V 5V 12V 15V 24V Rated Current 5A 5A 2.1A 1.6A 1.1A Current Range 0~5A 0~5A 0~2.1A 0~1.6A 0~1.1A Ripple and Noise (-20C~70C) <50mV <50mV <120mV <120mV <120mV Voltage ADJ. Range 3.0V~3.6V 4.4V~5.5V 10.0V~13.0V 13.8V~16.1V 20.7V~26.7V Voltage Accuracy 2.0% 2.0% 1.0% 1.0% 1.0% Line Regulation 0.5% 0.5% 0.5% 0.5% 0.5% Load Regulation 2.0% 2.0% 1.0% 1.0% 1.0% Set-up Time <2.0s (115VAC input, full load) <1.0s (230VAC input, full load) Hold-up Time >14ms (115VAC input, full load) >30ms (230VAC input, full load) Temperature Coefficient 0.03%/C Overshoot and Undershoot <5.0% Input Characteristics Voltage Range 88VAC~264VAC, 127VDC~370VDC Frequency Range 47Hz-63Hz Efficiency 115VAC Input 70% 76% 80% 82% 84% (Typical) 230VAC Input 71% 78% 82% 83% 85% AC Current (max) 0.7A 0.7A 0.7A 0.7A 0.7A Inrush Current (Typical) 20A 115VAC Cold start 40A 230VAC Cold start Leakage Current Input-Output: <0.25mA Input-PG: <0.75mA Protection Over Load (OLP) 105%~150% of rated output current, hiccup mode, auto recovery Over Voltage (OVP) 105%~150% of rated output voltage, constant voltage Short Circuit (SCP) Long-term mode, auto recovery Environmental Characteristics Operating Amb. Temp. & Hum -25C~70C 20%~90% RH Non-Condensing Storage Temp. & Hum -40C~85C 10%-95% RH Non-Condensing Safety Standards UL60950-1 EN60950-1: 2006 Withstand Voltage Primary-Secondary: 3.0KVAC 10mA. Primary-PG: 1.5KVAC 10mA. Secondary-PG: 0.5KVDC 10mA Isolation Resistance 100M ohms EMI Conduction & Radiation Compliance to EN55022(CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11 ENV50204, light industry level, criteria A General Characteristics MTBF (MIL-HDBK-217F) More than 200,000Hrs (25C, Full load) Dimension (LxWxH) 79x51x28.8mm Packing 48PCS/CTN. G.W: 10.4kgs Cooling Method Cooling by free air convection Rev. D Page 1 of 2P ualtek Q P C 25Watts Single Output QPD-25 Series Electronics Corporation MECHANICAL SPECIFICATIONS 2-M3 2-M3 Pin No. Assignment 1 AC-L 2 AC-N 3 F.G 4 DC output -V 5 DC output +V L DERATING CURVE UNIT: mm www.qualtekusa.com ISO-9001 Company Page 2 of 2