Technical Data Sheet QUARTZ SERIES FAILSAFE SMT Power Micro-SPDT 26.5GHz PAGE 1/6 ISSUE 31-07-20 SERIES Micro-SPDT PART NUMBER R516 XXX 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT TECHNOLOGY COMPATIBLE - High frequency - High life span - High repeatability - High power applications (All dimensions are in mm inches ) ACTUAL SIZE TYPICAL OUTLINE DRAWING PART NUMBER SELECTION R 516 1 0 Frequency range : Actuator terminals : 3 : DC 8GHz 0 : Not soldered 4 : DC 18GHz T : Soldered on a connectorized 7 : DC 26.5GHz test fixture (2) TYPE : 1 : Failsafe 9 : Failsafe, inverted RF path (1) ACTUATOR VOLTAGE (3) : 2 : 12Vdc 3 : 24Vdc (1): Can be combined with a failsafe model, so as to achieve the BYPASS function (see application details on page 5) (2): See details about test fixture dimensions on page 3 (3): 6V version available upon request This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary. Technical Data Sheet QUARTZ SERIES FAILSAFE SMT Power Micro-SPDT 26.5GHz PAGE 2/6 ISSUE 31-07-20 SERIES Micro-SPDT PART NUMBER R516 XXX 10X GENERAL SPECIFICATION Operating mode Failsafe (Type 1 & 9) Nominal operating voltage (Vdc) (1) 6 (1) 12 24 (across operating temperature range) (5.3 to 6.6) (10.5 to 13) (21.5 to 30) Coil resistance (+/-10%) (Ohms) 49 195 710 Operating current at 23C (mA) 123 61 34 gold plated access, infrared reflow, forced air oven or hand soldering RF and command ports (Compatible with lead free soldering processes) Switching Making contacts Max 5ms, including contact bounce time time (Nomial Breaking contacts 3ms voltage) Cold switching 1 million cycles (Max 120 cycles/min) Life Hot switching 500.000 cycles (1W, impedance 50 , V.S.W.R. <1.25) (Max 20 cycles/min) Dielectric test voltage 300Vrms Insulation Insulation resistance at 500Vdc > 100MOhms LEAD FREE construction Environmental protection Waterproofness according to IEC 60529 / IP64 immersion resistance 10min / 1m Mass 7.5g Operating temperature range (C) -25 to +70 (2) (With no icing nor condensation) Storage temperature range (C) -55 to +85 Shocks (According to MIL STD 202, method 213B, 100g / 6ms, sine No change of state Cond C) Sine vibration Condition D : 10-2000Hz, 20g Operating (MIL STD 202, method 204) Condition G : 10-2000Hz, 30g Non operating Random vibration - Condition F : 50-2000Hz, 20.71grms Operating TBC (1) : 6V version available upon request (MIL STD 202, method 214A, Profile I) - Condition H : 50-2000Hz, 29.28grms Non-operating TBC (2) : If coil remains permanently supplied under -25C, internal condensation may occur and generate contact failures. For such special applications from -25C to -40C, please contact us. PIN IDENTIFICATION (TOP VIEW) Failsafe model Inverted Failsafe model for Bypass (Type 1) application (type 9) Voltage RF Continuity Voltage RF Continuity De-energized C 1 (NC) De-energized C 1 (NC) Energized C 2 (NO) Energized C 2 (NO) This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.