Technical Data Sheet
QUARTZ SERIES FAILSAFE SMT Power Micro-SPDT 26.5GHz
PAGE 1/6 ISSUE 30-11-18 SERIES Micro-SPDT PART NUMBER R516 XXX 10X
R516 series: the RAMSES concept merges with the SLIM LINE
technology, breaking up the frequency limits of SMT switches :
- FULL SMT TECHNOLOGY COMPATIBLE
- High frequency
- High life span
- High repeatability
- High power applications
(All dimensions are in mm [inches])
ACTUAL SIZE
TYPICAL OUTLINE DRAWING
PART NUMBER SELECTION
R 516 _ _ _ 1 0 _
Frequency range :
Actuator terminals :
3 : DC 8GHz
0 : Not soldered
4 : DC 18GHz
T : Soldered on a connectorized
7 : DC 26.5GHz
test fixture (2)
TYPE :
1 : Failsafe
9 : Failsafe, inverted RF path (1)
ACTUATOR VOLTAGE (3) :
2 : 12Vdc
3 : 24Vdc
(1): Can be combined with a failsafe model, so as to achieve the BYPASS
function (see application details on page 5)
(2): See details about test fixture dimensions on page 3
(3): 6V version available upon request
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement
from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
Technical Data Sheet
QUARTZ SERIES FAILSAFE SMT Power Micro-SPDT 26.5GHz
PAGE 2/6 ISSUE 30-11-18 SERIES Micro-SPDT PART NUMBER R516 XXX 10X
GENERAL SPECIFICATION
Operating mode Failsafe (Type 1 & 9)
Nominal operating voltage (Vdc) (1) 6 (1) 12 24
(across operating temperature range) (5.3 to 6.6) (10.5 to 13) (21.5 to 30)
Coil resistance (+/-10%) (Ohms) 49 195 710
Operating current at 23C (mA) 123 61 34
gold plated access, infrared reflow, forced air oven or hand soldering
RF and command ports
(Compatible with lead free soldering processes)
Switching Making contacts Max 5ms, including contact bounce time
time
(Nomial
Breaking contacts
3ms
voltage)
Cold switching
2 million cycles
(Max 120 cycles/min)
Life
Hot switching
500.000 cycles (1W, impedance 50 , V.S.W.R. <1.25)
(Max 20 cycles/min)
Dielectric test voltage 300Vrms
Insulation
Insulation resistance at 500Vdc > 100MOhms
LEAD FREE construction
Environmental protection Waterproofness according to IEC 60529 / IP64
immersion resistance 10min / 1m
Mass 7.5g
Operating temperature range (C)
-40 to +70 (2)
(With no icing nor condensation)
Storage temperature range (C) -55 to +85
Shocks
(According to MIL STD 202, method 213B, 100g / 6ms, sine No change of state
Cond C)
Sine vibration Condition D : 10-2000Hz, 20g Operating
(MIL STD 202, method 204) Condition G : 10-2000Hz, 30g Non operating
Random vibration
- Condition F : 50-2000Hz, 20.71grms Operating TBC
(1) : 6V version available upon request
(MIL STD 202, method 214A, Profile I)
- Condition H : 50-2000Hz, 29.28grms Non-operating TBC
(2) : If coil remains permanently supplied under 0C, internal condensation may occur and generate contact
failures. For such applications down to -25C or -40C, a specific failsafe part number must be ordered.
Please contact us.
PIN IDENTIFICATION (TOP VIEW)
Failsafe model
Inverted Failsafe model for Bypass
(Type 1)
application (type 9)
Voltage RF Continuity
Voltage RF Continuity
De-energized C 1 (NC)
De-energized C 1 (NC)
Energized C 2 (NO)
Energized C 2 (NO)
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement
from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.