R573352425 Radiall

Technical Data Sheet SP4T Ramses SMA 3GHz Latching Self-cut-off Indicators 12Vdc TTL Diodes D-sub connector PAGE 1/2 ISSUE 16-04-20 SERIE : SPnT PART NUMBER : R573352425 RF CHARACTERISTICS Number of ways : 4 Frequency range : 0 - 3 GHz Impedance : 50 Ohms Frequency (GHz) DC - 3 VSWR max 1.20 Insertion loss max 0.20 dB Isolation min 80 dB Average power (*) 240 W ELECTRICAL CHARACTERISTICS Actuator : LATCHING Nominal current ** : 320 mA / RESET : 1280 mA **** Actuator voltage (Vcc) : 12V (10.2 to 13V) Terminals : 25 pins D-SUB male connector Indicator rating : 1 W / 30 V / 100 mA Self cut-off time : 40 ms < CT < 120 ms TTL inputs (E) - High level : 2.2 to 5.5 V / 800A at 5.5 V - Low level : 0 to 0.8 V / 20A at 0.8 V MECHANICAL CHARACTERISTICS Connectors : SMA female per MIL-C 39012 Life : 5 million cycles per position Switching Time*** : < 15 ms Construction : Splashproof Weight : < 220 g ENVIRONMENTAL CHARACTERISTICS Operating temperature range : -40C to +85C Storage temperature range : -55C to +85C (* Average power at 25C per RF Path) (** At 25 C 10%) (*** Nominal voltage 25 C) (**** Reset : supply voltage time 1sec. max. / duty cycle 10%) This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.Technical Data Sheet SP4T Ramses SMA 3GHz Latching Self-cut-off Indicators 12Vdc TTL Diodes D-sub connector PAGE 2/2 ISSUE 16-04-20 SERIE : SPnT PART NUMBER : R573352425 DRAWING TTL input RF Continuity Ind. RESET = 1 All ports open - - E1 = 1 IN 1 D.E E2 = 1 IN 2 D.F E3 = 1 IN 3 D.G IN 4 E4 = 1 D.H LABEL RADIALL R573352425 0 - 3 GHz Un : 12V Lot : General tolerances : 0,5 mm 0,02 in SCHEMATIC DIAGRAM This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.