Technical Data Sheet SP8T Ramses SMA 22GHz Normaly open 12Vdc Solder pins PAGE 1/2 ISSUE 20.09.13 SERIE : SPnT PART NUMBER : R573F02800 RF CHARACTERISTICS Number of ways : 8 Frequency range : 0 - 22 GHz Impedance : 50 Ohms Frequency (GHz) DC - 3 3 - 8 8 - 12.4 12.4 - 16 16 - 18 18 - 22 VSWR max 1,20 1,30 1,40 1,50 1,60 1,70 Insertion loss max 0.20 dB 0.30 dB 0.40 dB 0.55 dB 0.60 dB 0.70 dB Isolation min 80 dB 70 dB 60 dB 60 dB 60 dB 60 dB Average power (*) 240 W 150 W 120 W 110 W 100 W 90 W ELECTRICAL CHARACTERISTICS Actuator : NORMALLY OPEN Nominal current ** : 250 mA Actuator voltage (Vcc) : 12V (10.2 to 13V) / NEGATIVE COMMON Terminals : solder pins (250C max. / 30 sec.) MECHANICAL CHARACTERISTICS Connectors : SMA female per MIL-C 39012 Life : 2.000.000 cycles per position Switching Time*** : < 15 ms Construction : Splashproof Weight : < 280 g ENVIRONMENTAL CHARACTERISTICS Operating temperature range : -40C to +85C Storage temperature range : -55C to +85C (* Average power at 25C per RF Path) (** At 25 C 10%) (*** Nominal voltage 25 C) This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.Technical Data Sheet SP8T Ramses SMA 22GHz Normaly open 12Vdc Solder pins PAGE 2/2 ISSUE 20.09.13 SERIE : SPnT PART NUMBER : R573F02800 DRAWING Voltage RF Continuity -C +1 IN 1 -C +2 IN 2 -C +3 IN 3 -C +4 IN 4 -C +5 IN 5 -C +6 IN 6 -C +7 IN 7 IN 8 -C +8 LABEL RADIALL R573F02800 0 - 22 GHz Un : 12V Lot : General tolerances : 0.5 mm SCHEMATIC DIAGRAM This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.