R574402420 Radiall

Technical Data Sheet SP4T Terminated Ramses SMA 18GHz Normally open 12Vdc TTL Diodes Pins Terminals PAGE 1/2 ISSUE 06-02-18 SERIE : SPnT PART NUMBER : R574402420 RF CHARACTERISTICS Number of ways : 4 Frequency range : 0 - 18 GHz Impedance : 50 Ohms Frequency (GHz) DC - 3 3 - 8 8 - 12.4 12.4 - 18 VSWR max 1.20 1.30 1.40 1.50 Insertion loss max 0.20 dB 0.30 dB 0.40 dB 0.50 dB Isolation min 80 dB 70 dB 60 dB 60 dB Average power (*) 240 W 150 W 120 W 100 W TERMINATION IMPEDANCE : 50 Ohms TERM. AVG. POWER AT 25 C : 1 W per termination / 3 W total power ELECTRICAL CHARACTERISTICS Actuator : NORMALLY OPEN Nominal current ** : 250 mA Actuator voltage (Vcc) : 12V (10.2 to 13V) Terminals : solder pins (250C max. / 30 sec.) TTL inputs (E) - High level : 2.2 to 5.5 V / 800A at 5.5 V - Low level : 0 to 0.8 V / 20A at 0.8 V MECHANICAL CHARACTERISTICS Connectors : SMA female per MIL-C 39012 Life : 2 million cycles per position Switching Time*** : < 15 ms Construction : Splashproof Weight : < 250 g ENVIRONMENTAL CHARACTERISTICS Operating temperature range : -40C to +85C Storage temperature range : -55C to +85C (* Average power at 25C per RF Path) (** At 25 C 10%) (*** Nominal voltage 25 C) This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.Technical Data Sheet SP4T Terminated Ramses SMA 18GHz Normally open 12Vdc TTL Diodes Pins Terminals PAGE 2/2 ISSUE 06-02-18 SERIE : SPnT PART NUMBER : R574402420 DRAWING TTL input RF Continuity E1 = 1 IN 1 E2 = 1 IN 2 E3 = 1 IN 3 IN 4 E4 = 1 LABEL RADIALL R574402420 0 - 18 GHz Un : 12V Lot : General tolerances : 0,5 mm 0,02 in SCHEMATIC DIAGRAM This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.