R574803610 Radiall

Technical Data Sheet SP6T Terminated Ramses SMA2.9 40GHz Normally open 28Vdc Positive common Pins Terminals PAGE 1/2 ISSUE 16-04-20 SERIE : SPnT PART NUMBER : R574803610 RF CHARACTERISTICS Number of ways : 6 Frequency range : 0 - 40 GHz Impedance : 50 Ohms Frequency (GHz) DC - 6 6 - 12.4 12.4 - 18 18 - 26.5 26.5 - 40 VSWR max 1.30 1.40 1.50 1.70 2.20 Insertion loss max 0.20 dB 0.40 dB 0.50 dB 0.70 dB 1.10 dB Isolation min 70 dB 60 dB 60 dB 55 dB 50 dB Average power (*) 40 W 30 W 25 W 15 W 5 W TERMINATION IMPEDANCE : 50 Ohms TERM. AVG. POWER AT 25 C : 1 W per termination / 3 W total power ELECTRICAL CHARACTERISTICS Actuator : NORMALLY OPEN Nominal current ** : 102 mA Actuator voltage (Vcc) : 28V (24 to 30V) / POSITIVE COMMON Terminals : solder pins (250C max. / 30 sec.) MECHANICAL CHARACTERISTICS Connectors : SMA 2.9 female per MIL-C 39012 Life : 2 million cycles per position Switching Time*** : < 15 ms Construction : Splashproof Weight : < 250 g ENVIRONMENTAL CHARACTERISTICS Operating temperature range : -40C to +85C Storage temperature range : -55C to +85C (* Average power at 25C per RF Path) (** At 25 C 10%) (*** Nominal voltage 25 C) This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.Technical Data Sheet SP6T Terminated Ramses SMA2.9 40GHz Normally open 28Vdc Positive common Pins Terminals PAGE 2/2 ISSUE 16-04-20 SERIE : SPnT PART NUMBER : R574803610 DRAWING Voltage RF Continuity +C -1 IN 1 +C -2 IN 2 +C -3 IN 3 +C -4 IN 4 +C -5 IN 5 IN 6 +C -6 LABEL RADIALL R574803610 0 - 40 GHz Un : 28V Lot : General tolerances : 0,5 mm 0,02 in SCHEMATIC DIAGRAM This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.