R574833615 Radiall

Technical Data Sheet SP6T Terminated Ramses SMA2.9 40GHz Latching Indicators 28Vdc Positive common D-sub connector PAGE 1/2 ISSUE 06-02-18 SERIE : SPnT PART NUMBER : R574833615 RF CHARACTERISTICS Number of ways : 6 Frequency range : 0 - 40 GHz Impedance : 50 Ohms Frequency (GHz) DC - 6 6 - 12.4 12.4 - 18 18 - 26.5 26.5 - 40 VSWR max 1.30 1.40 1.50 1.70 2.20 Insertion loss max 0.20 dB 0.40 dB 0.50 dB 0.70 dB 1.10 dB Isolation min 70 dB 60 dB 60 dB 55 dB 50 dB Average power (*) 40 W 30 W 25 W 15 W 5 W TERMINATION IMPEDANCE : 50 Ohms TERM. AVG. POWER AT 25 C : 1 W per termination / 3 W total power ELECTRICAL CHARACTERISTICS Actuator : LATCHING Nominal current ** : 125 mA / RESET : 750 mA **** Actuator voltage (Vcc) : 28V (24 to 30V) / POSITIVE COMMON Terminals : 25 pins D-SUB male connector Indicator rating : 1 W / 30 V / 100 mA MECHANICAL CHARACTERISTICS Connectors : SMA 2.9 female per MIL-C 39012 Life : 2 million cycles per position Switching Time*** : < 15 ms Construction : Splashproof Weight : < 250 g ENVIRONMENTAL CHARACTERISTICS Operating temperature range : -40C to +85C Storage temperature range : -55C to +85C (* Average power at 25C per RF Path) (** At 25 C 10%) (*** Nominal voltage 25 C) (**** Reset : supply voltage time 1sec. max. / duty cycle 10%) This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.Technical Data Sheet SP6T Terminated Ramses SMA2.9 40GHz Latching Indicators 28Vdc Positive common D-sub connector PAGE 2/2 ISSUE 06-02-18 SERIE : SPnT PART NUMBER : R574833615 DRAWING Voltage RF Continuity Ind. +C -RESET All ports open - - +C -1 IN 1 D.G +C -2 IN 2 D.H +C -3 IN 3 D.I +C -4 IN 4 D.J +C -5 IN 5 D.E +C -6 IN 6 D.F LABEL RADIALL R574833615 0 - 40 GHz Un : 28V Lot : General tolerances : 0,5 mm 0,02 in SCHEMATIC DIAGRAM This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.