R574J22605 Radiall

Technical Data Sheet SP6T Terminated Ramses 2.4mm 50GHz Latching 12Vdc D-sub connector PAGE 1/2 ISSUE 10-07-19 SERIE : SPnT PART NUMBER : R574J22605 RF CHARACTERISTICS Number of ways : 6 Frequency range : 0 - 50 GHz Impedance : 50 Ohms Frequency (GHz) DC - 6 6 - 12.4 12.4 - 18 18 - 26.5 26.5 - 40 40 - 50 VSWR max 1.30 1.40 1.50 1.70 1.90 2.20 Insertion loss max 0.20 dB 0.40 dB 0.50 dB 0.70 dB 0.90 dB 1.20 dB Isolation min 70 dB 60 dB 60 dB 55 dB 50 dB 50 dB Average power (*) 40 W 30 W 25 W 15 W 5 W 3 W TERMINATION IMPEDANCE : 50 Ohms TERM. AVG. POWER AT 25 C : 1 W per termination / 3 W total power ELECTRICAL CHARACTERISTICS Actuator : LATCHING Nominal current ** : 320 mA / RESET : 1920 mA **** Actuator voltage (Vcc) : 12V (10.2 to 13V) / NEGATIVE COMMON Terminals : 25 pins D-SUB male connector MECHANICAL CHARACTERISTICS Connectors : 2.4mm female (Accoding to IEEE STD 287) Life : 2 million cycles per position Switching Time*** : < 15 ms Construction : Splashproof Weight : < 250 g ENVIRONMENTAL CHARACTERISTICS Operating temperature range : -25C to +70C Storage temperature range : -40C to +85C (* Average power at 25C per RF Path) (** At 25 C 10%) (*** Nominal voltage 25 C) (**** Reset : supply voltage time 1sec. max. / duty cycle 10%) This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.Technical Data Sheet SP6T Terminated Ramses 2.4mm 50GHz Latching 12Vdc D-sub connector PAGE 2/2 ISSUE 10-07-19 SERIE : SPnT PART NUMBER : R574J22605 DRAWING Voltage RF Continuity -C +RESET All ports open -C +1 IN 1 -C +2 IN 2 -C +3 IN 3 -C +4 IN 4 -C +5 IN 5 -C +6 IN 6 LABEL RADIALL R574J22605 0 - 50 GHz Un : 12V Lot : General tolerances : 0,5 mm 0,02 in SCHEMATIC DIAGRAM WARNING Sensitive connector : To avoid irreversible damage during any connexions, ensure that the center contact is aligned with the female socket This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.