R577063015 Radiall

Technical Data Sheet DPDT Ramses N 3GHz Latching Self-cut-off Indicators 28Vdc Positive common Diodes D-sub connector with bracket PAGE 1/2 ISSUE 22-12-16 SERIE : DPDT PART NUMBER : R577063015 RF CHARACTERISTICS Frequency range : 0 - 3 GHz Impedance : 50 Ohms Frequency (GHz) DC - 1 1 - 2 2 - 3 VSWR max 1.15 1.20 1.25 Insertion loss max 0.15 dB 0.20 dB 0.25 dB Isolation min 85 dB 80 dB 75 dB Average power (*) 700 W 500 W 400 W ELECTRICAL CHARACTERISTICS Actuator : LATCHING Nominal current ** : 125 mA Actuator voltage (Vcc) : 28V (24 to 30V) / POSITIVE COMMON Terminals : 9 pins D-SUB male connector Indicator rating : 1 W / 30 V / 100 mA Self cut-off time : 40 ms < CT < 120 ms MECHANICAL CHARACTERISTICS Connectors : N female per MIL-C 39012 Life : 2.5 million cycles Switching Time*** : < 15 ms Construction : Splashproof Weight : < 215 g ENVIRONMENTAL CHARACTERISTICS Operating temperature range : -40C to +85C Storage temperature range : -55C to +85C (* Average power at 25C per RF Path) (** At 25 C 10%) (*** Nominal voltage 25 C) This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.Technical Data Sheet DPDT Ramses N 3GHz Latching Self-cut-off Indicators 28Vdc Positive common Diodes D-sub connector with bracket PAGE 2/2 ISSUE 22-12-16 SERIE : DPDT PART NUMBER : R577063015 DRAWING LABEL RADIALL R577063015 0 - 3 GHz Un : 28V Lot : General tolerances : 0.5 mm SCHEMATIC DIAGRAM Voltage RF Continuity Ind. +C -1 1 3 / 2 4 C.1 +C -2 1 2 / 3 4 C.2 This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.