R585312300 Radiall

Technical Data Sheet SPDT Terminated Ramses SMA 3GHz Failsafe 12Vdc TTL Diodes Internal loads Pins terminals PAGE 1/2 ISSUE 09-03-21 SERIE : SPDT ZC PART NUMBER : R585312300 RF CHARACTERISTICS Frequency range : 0 - 3 GHz Impedance : 50 Ohms Frequency (GHz) DC - 3 VSWR max 1.20 Insertion loss max 0.20 dB Isolation min 80 dB Average power (*) 240 W ELECTRICAL CHARACTERISTICS Actuator : FAILSAFE Nominal current ** : 500 mA Actuator voltage (Vcc) : 12V (10.2 to 13V) Terminals : solder pins (250C max. / 30 sec.) TTL inputs (E) - High level : 2.2 to 5.5 V / 800A at 5.5 V - Low level : 0 to 0.8 V / 20A at 0.8 V MECHANICAL CHARACTERISTICS Connectors : SMA female per MIL-C 39012 Life : 2 million cycles Switching Time*** : < 10 ms Construction : Splashproof Weight : < 100 g ENVIRONMENTAL CHARACTERISTICS Operating temperature range : -40C to +85C Storage temperature range : -55C to +85C (* Average power at 25C per RF Path) (** At 25 C 10%) (*** Nominal voltage 25 C) This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.Technical Data Sheet SPDT Terminated Ramses SMA 3GHz Failsafe 12Vdc TTL Diodes Internal loads Pins terminals PAGE 2/2 ISSUE 09-03-21 SERIE : SPDT ZC PART NUMBER : R585312300 DRAWING LABEL 0 - 3 GHz Un : 12V RADIALL R585312300 Lot : General tolerances : 0,5 mm 0,02 in SCHEMATIC DIAGRAM TTL input RF Continuity E = 0 CNC / NO50 E = 1 CNO / NC50 This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.