Our Most Important Connection is with You. SMT Power Micro SPDT with 10 GHz Capabilities SURFACE MOUNT TECHNOLOGY Patent pending An innovative and originalmicro-mechanica design of the R596 SMT micro-relay offers, excellent RF performance, reliability, and repeatability. The miniature size, and low installation cost make these coaxial switches an ideal solution. Very low return loss and insertion loss allow this relay to be used in power applications, as well as in typical SMT relay applications such as RF attenuators, RF matrices, spectrum analysers, and telecommunications. Failsafe models are offered in two RF configurations (direct and inverted). The association of these two products on the same PC board enables the product to perform the bypass function. (For bypass mounting, further information is available on page 2-8). Actual Size Example of P/N: R596813100 is a SPDT SMT 8 GHz, 24 Vdc, failsafe, standard packaging. Typical Outline Drawing (All dimensions in mm) PART NUMBER SELECTION R 596 10 Frequency Range: 3: DC 3 GHz 8: DC 8 GHz Type: Packaging style (2): 1: Failsafe 0: Standard packaging 3: Latching, 2 coils 2: Tape and reel of 200 relays (2) 9: Failsafe, inverted RF path (1) 5: Tape and reel of 500 relays (2) 9: Tape without reel (2) (4) T: Soldered on a connectorized Actuator Voltage: test fixture (2) (3) 2: 12 Vdc 3: 24 Vdc (1): To be associated with a failsafe model, so as to achieve the BYPASS function (see application details on page 2-8) (2): Non standard packaging symbols (2, 5, 9 or T) are not marked on the relay (3): See details about test fixture dimensions on page 2-4 (4): Tape delivered without reel, available for all specific quantities up to 200 pieces 2-2 Go online for data sheets & assembly instructions. Visit www.radiall.com and enter the part number. SLIM LINE SERIESOur Most Important Connection is with You. SMT Power Micro SPDT with 10 GHz Capabilities SLIM LINE GENERAL SPECIFICATIONS Operating mode Failsafe (types 1 and 9) Latching (type 3) Nominal operating voltage 12 24 12 24 Vdc (10.2 to 13) (20.5 to 30) (10.2 to 13) (20.5 to 30) (across temperature range) Coil resistance at 23 C (+/-10%) 330 1130 205 865 Operating current at 23 C mA 36 25 58 32 1/2 hole gold plated, Infrared reflow, forced air oven or hand soldering RF and command ports (Compatible with lead free soldering processes) Switching time at Max 4ms (typical 1.8ms), including contact bounce time Making contacts nominal voltage Max 1ms (typical 0.5ms) Breaking contacts - Cold switching (max 120 cycles/min) 2 million cycles Life - Hot switching (max 20 cycles/min) 500.000 cycles (1W, impedance 50, V.S.W.R. < 1.25) Dielectric test voltage 300 Vrms Insulation Insulation resistance at 500Vdc > 100 MOhms Environmental protection Lead free construction - Waterproof (acc. To IEC 60529 / IP67) Mass < 2g Operating temperature range C -25 to +85 (5) -40 to +85 (with no icing nor condensation) Storage temperature range C - 55 to +85 - Condition D: 10-2000 Hz, 20g operating Sine vibration (MIL STD 202, Method 204D) - Condition G: 10-2000 Hz, 30g non operating - Condition F: 50-2000 Hz, 20.71g operating Random vibration (MIL STD 202, Method 214A, Profile I) - Condition H: 50-2000 Hz, 29.28g non operating Shocks (According to MIL STD 202, Method 213B, Cond. C) 100g / 6 ms, 1/2 sine operating (5): Failsafe models may be used down to 40C, but if coil remains permanently supplied at nominal voltage, the holding current value must be reduced from 45% to 55% to avoid internal condensation. (for more details, see Radiall application note AN-R596-51 on page 2-10). PIN IDENTIFICATION (TOP VIEW) Inverted failsafe model for Latching model Failsafe model Bypass application (Type 9) (Type 3) (Type 1) Voltage RF continuity Voltage RF continuity Voltage RF continuity De-energized C <--> 1(NC) De-energized C <--> 1(NC) -1 +1 C <--> 1 Energized C <--> 2(NO) Energized C <--> 2(NO) -2 +2 C <--> 2 Go online for data sheets & assembly instructions. Visit www.radiall.com and enter the part number. 2-3 SLIM LINE SERIES