RASPBERRY-MODB+-512M Raspberry Pi

2b Connect display 3 Connect input If not using HDMI, Plug in a USB keyboard 1 plug in your analogue and mouse TV or display 4 Connect network Connect to your wired network optional 1 Insert SD card Quick start See page 3 for how to prepare the SD card 5 Power up 2a Connect display Plug in the micro USB Plug in your digital TV power supply or monitor 1To set up your Raspberry Pi you will need: Item Minimum recommended specification & notes 1 SD card Minimum size 4Gb class 4 (the class indicates how fast the card is). We recommend using branded SD cards as they are more reliable. 2a HDMI to HDMI / DVI lead HDMI to HDMI lead (for HD TVs and monitors with HDMI input). OR HDMI to DVI lead (for monitors with DVI input). Leads and adapters are available for few pounds -- there is no need to buy expensive ones 2b RCA video lead A standard RCA composite video lead to connect to your analogue display if you are not using the HDMI output. 3 Keyboard and mouse Any standard USB keyboard and mouse should work. Keyboards or mice that take a lot of power from the USB ports, however, may need a powered USB hub. This may include some wireless devices. 4 Ethernet (network) cable Networking is optional, although it makes updating and getting new optional software for your Raspberry Pi much easier. 5 Power adapter A good quality, micro USB power supply that can provide at least 700mA at 5V is essential. Many mobile phone chargers are suitablecheck the label on the plug. If your supply provides less than 5V then your Raspberry Pi may not work at all, or it may behave erratically. Be wary of very cheap chargers: some are not what they claim to be. It does not maer if ytt our supply is rated at more than 700mA. 6 Audio lead optional If you are using HDMI then you will get digital audio via this. If you are using the analogue RCA connection, stereo audio is available from the 3.5mm jack next to the RCA connector. Know your leads: HDMI connector HDMI to DVI lead RCA composite video connector 2