AutoPro english Portable Infrared Thermometer for Automotive Diagnostics Noncontact Temperature Measurement AutoPro - For the Automotive Technician. Temperature variances can indicate common mechanical and electrical problems. Diagnose them faster, safer and easier with AutoPro, the noncontact infrared thermometer specially designed for the automotive professional. AutoPro features SmartSight - two lasers merge into a single laser point to indicate a 13 mm target, an ideal spot-size for small area measure- ments often required for auto diagnostics. AutoPro can read temperatures up to 535C, and can accurately measure in low light conditions, illuminating the work area with a built-in LED flashlight. AutoPro also features an illustrated, step-by-step user manual with detailed instructions for many common automotive diagnostic procedures, including engine misfires, exhaust and emissions, cooling systems and heating and air conditioning systems. Get the thermometer designed especially for automotive technicians Raytek AutoPro. Point Focus Measure 1 2 3 Laser Sighting Pull the trigger. Work Two laser points con- Instant reading is area is illuminated, two verge to a single spot, shown on the laser points are visible. a 13 mm target backlit panel. is ready to measure.Specifications Laser Sighting Temperature Range -32 to 535C Accuracy for target For targets at 23 to 510C: temperatures 1% of reading or 1C, (assumes ambient whichever is greater temperature of For targets above 510C: Laser Sighting 23C 5C) 1.5% of reading For targets at -32 to -26C: 3C For targets at -26 to -18C: 2.5C For targets at -18 to 23C: 2C Repeatability 0.5% or 1C, whichever is greater 0.5 second (95% of reading) Response Time Spectral Response 8-14 m Two lasers converge to a single bright dot, for a measurement area of 13 mm. Emissivity Pre-set at 0.95 0 to 50C Ambient Operating Temp. 10 - 90% Relative Humidity -20 to 60C without battery Storage Temperature 360 g / 205 x 160 x 55 mm Weight/Dimensions Power 9 V Alkaline or NiCd Battery Battery Life (Alkaline) 4 hrs w/laser, flashlight & backlight on 20 hrs w/laser, flashlight & backlight off Laser (Class II) SmartSight dual laser sighting system Typical Distance to Target 200 mm - 600 mm Distance to Spot (D:S) Optimized for use at 200 mm Approximately 16:1 at focus point MAX Temp. Display Display Hold (7 seconds) LCD Backlit Temperature Display C or F selectable Display Resolution 0.2C Hard Case Tripod Mounting Removable base magnet Work area illumination Bright white LED (7100 millicandle) Illustrated Manual Additional Options/ Nylon Holster Accessories DKD/NIST Traceable Calibration Certificate 2002 Raytek GmbH (55527 A4 Rev A) 12/2002 www.raytek.com Specifications subject to change without notice. Raytek and the Raytek logo are registered trademarks, and AutoPro and SmartSight are trademarks of Raytek for up-to-the-minute features Corporation. Raytek is ISO 9001 certified.