R1DX-0505/H-Tray Recom Power

1W Power in SMD package Features Pin compatible with R1D series DC/DC Converter -40C to +95C operating temperature full load High 3kVDC/1 second or 1kVDC/1 second isolation Unregulated IEC/EN/UL62368-1 certified, CB Report Converters 5000m operation R1DX Description 1 Watt Low cost, low profile, open-frame 1W SMD isolated DC/DC dual output converters. The R1DX operates from 5V and offers 5, 9, 12 or 15 dual outputs. There is no minimum load requirement and the SMD quiescent consumption is less than 150mW. Standard isolation is 1kVDC/1s and a /H version with 3kVDC/1s is available. The operating temperature is from -40C up to +95C without derating. The Dual Output pin-out is industry standard and compatible with the R1D series, but at half the height. The converters are fully certified to IEC/EN/UL62368 and IEC/EN/UL60950 and are 10/10 RoHS-conform. Class A EMC conformity requires only an input capacitor and a simple low cost LC filter is all that is needed for Class B EMC. Selection Guide Part nom. Input Output Output Efficiency max. Capacitive (1) (2) Number Voltage Voltage Current typ. Load VDC VDC mA % F R1DX-0505 5 5 100 78 1000 R1DX-0509 5 9 56 78 470 R1DX-0512 5 12 42 80 220 R1DX-0515 5 15 33 80 220 Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient E224736 Note2: Max Cap Load is tested at nominal input and full resistive load IEC/EN62368-1 certified UL62368-1 certified IEC/EN60950-1 certified C22.2 No. 62368-1-14 certified CB Report Model Numbering EN55032 compliant EN55024 compliant R1 DX- / (4) Output Power Packaging (3) Dual Isolation Voltage nom. Output Voltage nom. Input Voltage Notes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second) Note4: with suffix -R, standard packaging Tape and Reel with suffix -Tray for optional tray packaging Ordering Examples: R1DX-0505-R 5Vin 5Vout 1kVDC/1 second isolation tape and reel packaging R1DX-0515/H-Tray 5Vin 15Vout 3kVDC/1 second isolation tray packaging www.recom-power.com REV.: 5/2019 ECO-1Typical Load Line Typical Load Line R1DX DC/DC Converter Series Specifications (measured Ta= 25C, nominal input voltage, full load unless otherwise specified) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Internal Input Filter capacitor Input Voltage Range 10.0% 40mA Quiescent Current Minimum Load 0% 20kHz 60kHz 100kHz Internal Operating Frequency (5) Output Ripple and Noise 20MHz BW 100mVp-p Notes: Note5: Measurements are made with a 0.1F MLCC across output (low ESR) DX-05xx Efficiency vs. Load 100 90 80 70 60 50 40 30 5Vout 20 9Vout 12Vout 10 15Vout 0 0 10 20 30 40 50 60 70 80 90 100 Output Load % REGULATIONS Parameter Condition Value Output Accuracy 5.0% max. Line Regulation low line to high line 1.2% typ. at 1.0% of Vin typ. 5Vout 10.0% typ. / 15.0% max. Load Regulation 10% to 100% load all others 8.0% typ. / 10.0% max. Cross Regulation 6.5% max. Tolerance Envelope R1DX-0505(/H) R1DX-0509(/H) +15% +10% +9% +7% +5% +5% Vnom Vnom -1% -2% -5% -5% 10 50 100 10 50 100 Output Load % Output Load % continued on next page www.recom-power.com REV.: 5/2019 ECO-2 Output Voltage % Efficiency % Output Voltage %