1kVDC & 2kVDC Isolation ECONOLINE Features UL94V-0 Package Material DC/DC-Converter RoHS 6/6 Regulated with 3 year Warranty Toroidal Magnetics Converters Optional Continuous Short Circuit Protected Built-In EN55022 Class A Filter The R1Z series DC/DC converter has been designed for isolating or converting DC power rails Description where an SMD format with regulated output is required, although it is no larger than a standard unregulated SMD converter. Selection Guide 1 Watt SMD Part Input Output Output Max Number Voltage Voltage Current Capacitive (1) SMD 2kVDC (VDC) (VDC) (mA) Load Miniature R1Z-xx3.3* (/H) 3.3, 5, 12, 15, 24 3.3 303 2200F R1Z-xx05* (/H) 3.3, 5, 12, 15, 24 5 200 1200F Isolated R1Z-xx09* (/H) 3.3, 5, 12, 15, 24 9 111 680F R1Z-xx12* (/H) 3.3, 5, 12, 15, 24 12 84 680F Single Output R1Z-xx15* (/H) 3.3, 5, 12, 15, 24 15 66 470F xx= Input Voltage (other input and output voltage combinations available on request *add suffix -R for tape & reel packing e.g. R1Z-0505-R *add suffix /P for continuous short circuit protection, e.g. R1Z-0505/P-R Specifications (measured at T = 25C, nominal input voltage, full load and after warm-up) A Input Voltage Range 5% Output Voltage Accuracy 2% RoHS 2011/65/EU Line Voltage Regulation 1% max. E358085 6/6 Load Voltage Regulation 1% max. Output Ripple and Noise (at 20MHz BW) 100mVp-p max. EN-60950-1 Certified Operating Frequency 20kHz min. / 40kHz typ. / 80kHz max. EN-60601-1 Certified* Efficiency at Full Load 50% min. / 60% typ. UL-60950-1 Certified Minimum Load 10% (2) (*/H suffix) No Load Power Consumption 134mW min. / 217mW typ. / 350mW max. Isolation Voltage (tested for 1 second) 1000VDC (rated for 1 minute**) 500VAC / 60Hz R1Z Isolation Voltage H-Suffix (tested for 1 second) 2000VDC H-Suffix (rated for 1 minute**) 1000VAC / 60Hz Isolation Capacitance 70pF typ. Isolation Resistance 10 GW min. Short Circuit Protection 1 Second Derating-Graph P-Suffix Continuous (Ambient Temperature) Operating Temperature Range (natural convection) -40C to +70C (see Graph) Storage Temperature Range -55C to +125C Reflow Temperature ROHS compliant 245C (30 sec) max. Vapor Phase Process 230C (90 sec) max. (for more details see Application Notes) Relative Humidity 95% RH Package Weight 1.6g Packing Quantity 33 pcs per tube 250 pcs per Reel 3 MTBF R1Z (+25C) using MIL-HDBK 217F 2203 x 10 hours 3 (+70C) using MIL-HDBK 217F 391 x 10 hours . 3 R1Z/P (+25C) using MIL-HDBK 217F 2387 x 10 hours 3 (+70C) using MIL-HDBK 217F 641 x 10 hours For detailed information see Application Notes chapterMTB Conducted / Radiated Emissions EN55022 Level A EN General Safety Report: SPCLVD1211033-3 EN60950-1:2006 + A12:2011 EN Medical Safety Report: MDD1205098-4 + RM1205098-4 IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk Assessment Refer to Application Notes UL General Safety Report: E358085 UL60950-1, 2nd Edition www.recom-power.com REV: 0/2015 E-119 **Any data referred to in this datasheet are of indicative nature For further details, Application Notes. and based on our practical experience only. please refer to our R1Z ECONOLINE DC/DC-Converter Series Typical Characteristics R1Z-3.3xx/P R1Z-05xx/P R1Z-12xx/P 3 + +4 % & 3 + +4 % & 3 + +4 % & * + * + * + R1Z-15xx/P R1Z-3.3xx R1Z-05xx 3 + +4 % & 3 + +4 % & 3 + +4 % & * + * + * + Notes R1Z-12xx R1Z-15xx 3 + +4 % & Note 1: Maximum capacitive load is defined as the 3 + +4 % & capacitive load that will allow start up in under 1second without damage to the converter Note 2: The R1Z series requires a minimum of 10% load on the output to the maintain specified regulation. Operating under no-load conditions will not damage these devices however, they may not meet all listed specifications. * + * + Package Style and Pinning (mm) 10 PIN Single SMD Package Ordering Example: R1Z-0505 (5V Input, 5V Output, not short ( (. circuit protected) R1Z-0505/HP (5V Input, 5V Output, 2kVDC (. /( Isolation and short circuit protection) ( ( ( 5 A ( 1% ( Recommended Footprint Details . * % ( ( ( XX.X 0.5 mm XX.XX 0.25 mm ( ( ( The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOMs explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. E-120 REV: 0/2015 www.recom-power.com Pin Connections Pin Function 1 Vin 2 +Vin 4 -Vout 5 -Vout 7 +Vout 10 NC NC= No Connection R1Z/P 3 + +4 3 + +4 3 + +4 3 + +4 3 + +4 3 + +4 3 + +4 3 + +4