35mW max. no load power consumption Features Efficiency up to 76% AC/DC Converter Isolated output 3kVAC / 1 min SCP, OVP protection Regulated Wide operating temperature range: -40C to +85C Converter Universal input 85-305VAC RAC02-SE/277RAC Description 2 Watt The ultra-compact RAC02-SE/277 modules are available with output voltages of 3.3, 5, 12 and Single 24V, and the input-to-output isolation is 3kVAC/1min. With a standby consumption of 35mW maximum, the mini power supplies are particularly suitable for energy-saving sleep mode and Output standby applications. Because of its compact design (height <18mm), it is a versatile solution for home automation and other similar applications. Complete with an integrated input filter, the series has enhanced EMI performance and complies with EN55032, class B. The mini power supplies are also protected against short circuit with fully automatic restart after the error has been solved. The converters are EN/UL60950-1 certified and come complete with a 3 year warranty. Selection Guide Part nom. Input Output Output Efficiency Max. Capacitive (1) (2) Number Voltage Range Voltage Current typ Load VAC VDC mA % F RAC02-3.3SE/277 100-277 3.3 600 67 12000 RAC02-05SE/277 100-277 5 400 70 5500 RAC02-12SE/277 100-277 12 167 73 500 RAC02-24SE/277 100-277 24 83 76 160 Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient Note2: Max Cap Load is tested by minimum input and constant resistor load E224736 Model Numbering RAC02- SE/277 IEC/EN60950-1 certified nom. Output Power Single CAN/CSA-22.2 No. 60950 certified UL60950-1 certified Output Voltage EN60335-1 certified EN55032 certified EN55024 certified EN55014 certified Ordering Examples: RAC02-05SE/277 2 Watt 5Vout Single Output RAC02-12SE/277 2 Watt 12Vout Single Output www.recom-power.com REV.: 10/2018 PA-1RAC02-SE/277 AC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin (115/230VAC), full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. nom. Vin = 230VAC 85VAC 277VAC 305VAC (3,4) Input Voltage Range 120VDC 430VDC 115VAC 47mA Input Current 230VAC 30mA 115VAC 15A Inrush Current cold start at +25C 230VAC 30A No load Power Consumption 85-305VAC, 47-63Hz 35mW Input Frequency Range AC Input 47Hz 440Hz (5) Minimum Load 2% Hold-up Time 115VAC 18ms Internal Operating Frequency 100% load at nominal Vin 55kHz 3.3V 300mVp-p (6) 20MHz BW Output Ripple and Noise all others 250mVp-p Notes: Note3: The products were submitted for safety files at AC-Input operation Note4: No line derating required Note5: Operation below 2% load will not harm the converter, but specifications may not be met Note6: Ripple and Noise is the maximum peak-to-peak voltage value measured at the output with a 20MHz bandwidth, at rated line voltage at full load. And with a 47F low-ESR electrolytic capacitor in parallel with a 0.1F ceramic capacitor across output Efficiency vs. Load RAC02-05SE/277 RAC02-12SE/277 100 100 90 90 80 80 70 70 60 60 50 50 115VAC 115VAC 40 40 230VAC 230VAC 277VAC 277VAC 30 30 20 20 10 10 0 0 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Output Load % Output Load % REGULATIONS Parameter Condition Value (7) Output Accuracy 6.0% max. Line Regulation low line to high line, full load 1.5% max. Load Regulation 2% to 100% load 6.0% typ. Notes: Note7: Includes initial voltage accuracy, thermal drift, line regulation and load regulation at rated input voltage and load conditions continued on next page www.recom-power.com REV.: 10/2018 PA-2 Efficiency % Efficiency %