30mW max. no load power consumption Features High efficiency up to 80% AC/DC Converter Isolated output 3kVAC / 1 min SCP, OVP protection Regulated Wide operating temperature range: -40C to +85C Converter Universal input 85-305VAC RAC03-SE/277/WRAC Description 3 Watt The ultra-compact wired RAC03-SE/277/W modules are available with output voltages of Single 3.3, 5, 12 and 24V, and the input-to-output isolation is 3kVAC/1min. With a standby consumption of 30mW typical, the mini power supplies are particularly suitable for energy-saving Output sleep mode and standby applications. Because of its compact design (height <18mm), it is a versatile solution for home automation and other similar applications. Complete with an integrated input filter, the series has enhanced EMI performance and complies with EN55032, class B. The mini power supplies are also protected against short circuit with fully automatic restart after the error has been solved. The converters are EN/UL60950-1 certified and come complete with a 3 year warranty. Selection Guide Part nom. Input Output Output Efficiency Max. Capacitive (1) (2) Number Voltage Range Voltage Current typ Load VAC VDC mA % F RAC03-3.3SE/277/W 100-277 3.3 900 71 22000 RAC03-05SE/277/W 100-277 5 600 76 7500 RAC03-12SE/277/W 100-277 12 250 78 1000 RAC03-24SE/277/W 100-277 24 125 80 200 Notes: Note1: Efficiency is tested at 230VAC and full load at +25C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load Model Numbering E224736 RAC03- SE/277/W Wired nom. Output Power Output Voltage Single IEC/EN60950-1 certified CAN/CSA-22.2 No. 60950 certified UL60950-1 certified Ordering Examples: EN60335-1 certified RAC03-05SE/277/W 3 Watt 5Vout Single Output Wired Version EN55032 certified RAC03-12SE/277/W 3 Watt 12Vout Single Output Wired Version EN55024 certified EN55014 certified CB Report www.recom-power.com REV.: 8/2018 PA-1RAC03-SE/277/W AC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin (115/230VAC), full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. nom. Vin= 230VAC 85VAC 277VAC 305VAC (3) Input Voltage Range 120VDC 430VDC 115VAC 70mA Input Current 230VAC 45mA 115VAC 15A Inrush Current cold start at +25C 230VAC 30A No load Power Consumption 85-305VAC, 47-63Hz 30mW Input Frequency Range AC Input 47Hz 440Hz Minimum Load 2% 115VAC 15ms Hold-up Time 230VAC 80ms Internal Operating Frequency 100% load at nominal Vin 55kHz (4) 200mVp-p Output Ripple and Noise Notes: Note3: No line derating required Note4: Ripple and Noise is the maximum peak-to-peak voltage value measured at the output with a 20MHz bandwidth, at rated line voltage at full load. And with a 47F low-ESR electrolytic capacitor in parallel with a 0.1F ceramic capacitor across output Efficiency vs. Load RAC03-05SE/277/W 100 90 80 70 60 50 115VAC 40 230VAC 30 277VAC 20 10 0 0 10 20 30 40 50 60 70 80 90 100 Output Load % REGULATIONS Parameter Condition Value (5) Output Voltage Tolerance 6.0% max. Line Regulation low line to high line, full load 1% typ. / 1.5% max. Load Regulation 10% to 100% load 6.0% typ. Notes: Note5: Includes initial voltage accuracy, thermal drift, line regulation and load regulation at rated input voltage and load conditions www.recom-power.com REV.: 8/2018 PA-2 Efficiency %