RP15-2405SF RECOM POWER

2:1 input voltage range Features 1.6kVDC isolation DC/DC Converter UL certified Efficiency up to 88% Regulated Six-sided continuous shield Converter Fixed operating frequency RP15-F Description 15 Watt The RP15-F series DC/DC converters are certified to UL 60950-1 and to cUL 60950-1. This makes 2 x 1 them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2 x 1 package meets military standards for thermal shock and vibration tolerance. Single and Dual Output Selection Guide (1) (1) Part Number Input Output Output Input Efficiency Max. Capacitive (2) Voltage Range Voltage Current Current typ. Load VDC VDC mA mA % F (3,4) RP15-123.3SF 9-18 3.3 4000 1392 79 10200 (3,4) RP15-1205SF 9-18 5 3000 1524 82 7050 (3,4) RP15-1212SF 9-18 12 1250 1453 86 1035 (3,4) RP15-1215SF 9-18 15 1000 1453 86 705 (3,4) RP15-243.3SF 18-36 3.3 4000 688 80 10200 (3,4) RP15-2405SF 18-36 5 3000 744 84 7050 (3,4) RP15-2412SF 18-36 12 1250 735 85 1035 (3,4) RP15-2415SF 18-36 15 1000 735 85 705 (3,4) RP15-483.3SF 36-75 3.3 4000 340 81 10200 (3,4) RP15-4805SF 36-75 5 3000 377 83 7050 (3,4) RP15-4812SF 36-75 12 1250 359 87 1035 E196683 (3,4) RP15-4815SF 36-75 15 1000 363 86 705 (3,4) RP15-1205DF 9-18 5 1500 1506 83 1020 (3,4) RP15-1212DF 9-18 12 625 1453 86 495 (3,4) RP15-1215DF 9-18 15 500 1488 84 165 (3,4) RP15-2405DF 18-36 5 1500 744 84 1020 UL60950-1 certified (3,4) RP15-2412DF 18-36 12 625 727 86 495 (3,4) RP15-2415DF 18-36 15 500 727 86 165 (3,4) RP15-4805DF 36-75 5 1500 368 85 1020 (3,4) RP15-4812DF 36-75 12 625 355 88 495 (3,4) RP15-4815DF 36-75 15 500 359 87 165 Notes: Note1: Maximum values at nominal input voltage and full load Note2: Max. Cap load is tested at minimum input and constant resistive load Model Numbering RP15- F/ - (4) nom. Input Voltage Package (3) Output Voltage CTRL Logic Single or Dual Notes: Note3: no suffix for standard part without CTRL pin add suffix P for CTRL function with positive logic (1=ON, 0=OFF) add suffix N for CTRL function with negative logic (0=ON, 1=OFF) Note4: add suffix -HC for premounted Heat-sink with clips Ordering Examples RP15-2405SF/P = 24V input, 5V output, single, positive logic CTRL pin RP15-4812DF/N-HC = 48V input, 12V output, dual, negative logic CTRL pin, Heat-sink premounted www.recom-power.com REV.: 3/2019 PD-1RP15-F DC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin, full load unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Filter Pi-Type nom. Vin = 12VDC 9VDC 12VDC 18VDC Input Voltage Range nom. Vin = 24VDC 18VDC 24VDC 36VDC nom. Vin = 48VDC 36VDC 48VDC 75VDC nom. Vin = 12VDC 36VDC Input Surge Voltage 100ms max. nom. Vin = 24VDC 50VDC nom. Vin = 48VDC 100VDC (5) Input Reflected Ripple Current 20mAp-p (6) Minimum Load 10% Start-up Time Power up 20ms V DC-DC ON Open or 3.5VDC < < 12VDC CTRL Positive Logic V DC-DC OFF Short or 0VDC < < 1.2VDC CTRL (7) ON/OFF CTRL V DC-DC ON Short or 0VDC < < 1.2VDC CTRL Negative Logic V DC-DC OFF Open or 3.5VDC < < 12VDC CTRL DC-DC ON -0.5mA +1.0mA Input Current of CTRL pin DC-DC OFF 20mA Standby Current Single 450kHz 500kHz 550kHz Internal Operating Frequency Dual 270kHz 300kHz 330kHz Single 50mVp-p Ripple and Noise 20MHz BW Dual 75mVp-p Notes: Note5: Simulated source impedance of 12H. 12H inductor in series with +Vin Note6: The RP15-F series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not dama ge these devices, however they may not meet all listed specification Note7: If no suffix is specified, the control pin will be omitted. If fitted, the ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin RP15-1205SF Efficiency vs. Input Voltage full load Efficiency vs. Output Current 95 86 90 84 85 80 82 75 70 80 65 60 78 55 9Vin 50 76 12Vin 45 18Vin 40 74 9 10 11 12 13 14 15 16 17 18 10 20 30 40 50 60 70 80 90 100 Input Voltage VDC Output Current % continued on next page www.recom-power.com REV.: 3/2019 PD-2 Efficiency % Efficiency %