FFM301 THRU FFM307 SURFACE MOUNT GLASS PASSIVATED FAST RECOVERY SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 3.0 Amperes FEATURES * Glass passivated device * Ideal for surface mounted applications * Low leakage current * Metallurgically bonded construction * P/N suffix V means AEC-Q101 qualified * P/N suffix V means Halogen-free 0.125 (3.17) ( ) 0.245 6.22 0.115 (2.92) ( ) 0.220 5.59 MECHANICAL DATA ( ) 0.280 7.11 * Epoxy : Device has UL flammability classification 94V-0 ( ) 0.260 6.60 * Mounting position: Any * Weight: 0.24 gram 0.012 (0.305) 0.006 (0.152) 0.103 (2.62) ( ) 0.079 2.06 ( ) 0.060 1.52 ( ) 0.008 0.203 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.030 (0.76) ( ) 0.004 0.102 o Ratings at 25 C ambient temperature unless otherwise specified. ( ) 0.320 8.13 Single phase, half wave, 60 Hz, resistive or inductive load. 0.305 (7.75) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) o MAXIMUM RATINGS (At TA = 25 C unless otherwise noted) SYMBOL FFM301 FFM302 FFM303 FFM304 FFM305 FFM306 FFM307 UNITS RATINGS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts o Maximum Average Forward Rectified Current at TA = 55 C IO 3.0 Amps Peak Forward Surge Current 8.3 ms single half sine-wave IFSM 200 Amps superimposed on rated load (JEDEC method) 2 2 Typical Current Squarad Time A /Sec I t 166 0 (Note 2) R Q JL 15 C/W Maximum Thermal Resistance 0 (Note 3) RQ JA 50 C/W Typical Junction Capacitance (Note 1) CJ 60 pF 0 Operating and Storage Temperature Range TJ, TSTG -65 to + 175 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS SYMBOL FFM301 FFM302 FFM303 FFM304 FFM305 FFM306 FFM307 UNITS Maximum Forward Voltage at 3.0A DC VF 1.3 Volts o Maximum Full Load Reverse Current,Full cycle Average at TA = 55 C 50 uAmps o IR Maximum DC Reverse Current at TA = 25 C 10 uAmps o Rated DC Blocking Voltage TA = 150 C mAmps 5.0 trr 150 250 500 nSec Maximum Reverse Recovery Time (Note 4) NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC 2018-01 2 2. Thermal resistance junction to terminal 6.0mm copper pads to each terminal. REV:B 2 3. Thermal resistance junction to ambient, 6.0mm copper pads to each terminal. 4. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A( ) RATING AND CHARACTERISTIC CURVES FFM301 THRU FFM307 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE SURGE CURRENT 5 200 4 100 3 50 2 8.3ms Single Half Sine-Wave 30 Single Phase (JEDED Method) Half Wave 60Hz 20 1 Resistive or Inductive Load 0 10 0 25 50 75 100 125 150 175 1 5 10 50 100 AMBIENT TEMPERATURE, ( ) NUMBER OF CYCLES AT 60Hz FIG. 3 - TYPICAL INSTANTANEOUS FIG. 4 - TYPICAL JUNCTION CAPACITANCE FORWARD CHARACTERISTICS 200 20 10 100 60 3.0 40 T = 25J J 1.0 20 Pulse Width=300uS 1% Duty Cycle 0.3 10 T = 25 J 6 0.1 4 .03 2 1 .01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 .1 .2 .4 1.0 2 4 10 20 40 100 INSTANTANEOUS FORWARD VOLTAGE, (V) REVERSE VOLTAGE, ( V ) FIG. 5 - TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50 10 trr NONINDUCTIVE NONINDUCTIVE +0.5A ( - ) D.U.T 0 ( + ) PULSE 25 Vdc GENERATOR -0.25A (approx) (NOTE 2) ( - ) 1 OSCILLOSCOPE ( + ) NON- (NOTE 1) INDUCTIVE -1.0A 1cm SET TIME BASE FOR NOTES:1 Rise Time = 7ns max. Input Impedance = 50/100 ns/cm 1 megohm. 22pF. 2. Rise Time = 10ns max. Source Impedance = 50 ohms. RECTRON INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) JUNCTION CAPACITANCE, (pF) PEAK FORWARD SURGE CURRENT, (A)