Thread Conversion Specialists Increased Safety Hex Head Stopping Plugs IP54 & NEMA 3 PH-E Series Increased Safety Hex Head Stopping Plugs provide a method of filling unused entries in Ex equipment, maintaining the certification and integrity of the equipment. CENELEC CSA / A Ex Sira 00ATEX3092 Class I, Zone 1, Ex e II II 2DG E Ex e II Class I Division 2 ABCD Class II EFG, Class III Ingress Protection: IP54, CSA Enclosure Type (NEMA) 3 Impact Resistance: 7Nm Ambient Temperature: 50 to +85C Threadforms: Metric, NPT, NPSM, ISO Pipe (BSP), PG, ET Materials: Brass, 316 Stainless Steel, Aluminium Plating: Nickel, Zinc, other on application Part Number: Please refer to Part Numbering System Sizes Available & Dimension References Metric Dim Ref NPT Dim Ref ISO Pipe Dim Ref PG Dim Ref M16 A PG7 A 1 1 M20 B 2 E 2 B PG9 A 3 3 M25 B 4 E 4 B PG11 B M32 B 1 F 1 B PG13.5 B 1 1 M40 C 1 4 F1 4 C PG16 B 1 1 M50 C 1 2 F1 2 C PG21 B M63 D 2 F 2 D PG29 C 1 1 M75 D 2 2 G2 2 D PG36 C 3 G 3 D PG42 C PG48 D * * ISO Pipe taper dims as NPT sizes Dimensions ABCD E F G Hexagon A/F Minimum 5.5mm larger than the major thread diameter Total Length 14.5 15.0 15.5 16.0 14.0 16.0 18.0 Thread Length 10.0 10.0 10.0 10.0 18.0 21.5 24.5 For full material specifications and options please refer to Material Specifications.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for redapt manufacturer: Other Similar products are found below : RDU100504 RDU100604 IPWSHRRFM16 P/S.ETAGM16 ADU100429 SW-Z-6-0-00-04 RDU103004 DOME HD PLUGM20 ADU102904 SW-Z-6-0-00-03 IPWSHRRFM20 IPWSHRRFM25