708FX2 Industrial Ethernet Switch N-Tron Networking Series Managed Industrial Ethernet Switch THEINDUSTRIALNETWORKCOMPANY 708FX2 The N-TRON 708FX2 Industrial Ethernet Switch combines outstanding performance and ease of use. The fully managed switch is ideally suited for connecting Ethernet-enabled industrial and/or security equipment. PRODUCT FEATURES Six 10/100BaseTX RJ-45 Ports Two 100BaseFX Fiber ports, ST or SC style o o -40 C to 85 C Operating temperature ESD and Surge Protection Diodes on all Ports Auto Sensing 10/100BaseTX, Duplex, and MDIX Store-and-Forward Technology Rugged DIN-Rail Enclosure Redundant Power Inputs (10-30 VDC) Con gurable Alarm Contact Con gurable Bi-Color Fault Status LED Rapid Spanning Tree Fully Managed Features: This function allows the switch to be con gured in a ring or mesh Full SNMP and Web Browser Management topology, and provides support for redundant path communications Detailed Ring Map and Fault Location Charting with high-speed (rapid) healing. N-Ring Technology with ~30ms Healing Remote Monitoring Options N-View OPC Monitoring For ease of configuration and monitoring, the 708FX2 offers Plug-and-Play IGMP Support web browser management and N-View OLE for Process Control 802.1Q tag VLAN and Port VLAN (OPC) server software. The N-TRON N-View software can be 802.1p QoS and Port QoS combined with popular HMI software packages to add network EtherNet/IP CIP Messaging traf c monitoring, trending, and alarming to any application using LLDP (Link Layer Discovery Protocol) N-TRON switches. In addition SNMP is available for switch link and status monitoring. The Alarm Contact and Status LED can be Trunking con gured to respond to power failure on power input 1 or input 2, Mirroring N-Ring Broken, Partial Break High, Partial Break Low, or if multiple 802.1d, 802.1w, 802.1D RSTP ring managers are detected. DHCP Server, Option 82 relay, Option 61, IP Fallback N-Ring Technology Port SecurityMAC Address Based The switch s ring manager, using N-TRON s N-Ring technology, Management Features offers expanded ring size capacity, detailed fault diagnostics, and The 708FX2 offers several management functions that can be easily a standard healing time of ~30ms. The 708FX2 ring manager con gured using a web browser. periodically checks the health of the ring via packets. If the ring manager stops receiving these health check packets, it converts the IGMP Snooping - Internet Group Management Protocol is a Ring to a linear bus topology within ~30ms. When all switches in feature that allows the 708FX2 switch to forward and filter the ring are N-TRON fully managed switches, a detailed ring map multicast traffic intelligently. and fault location chart will also be provided on the ring managers VLAN - Virtual Local Area Network allows you to segment web browser and OPC server to identfy the health status of the the switch in order to create two or more separate local area ring. N-Link allows the linking of two N-Rings. Up to 250 fully network domains. managed N-TRON switches can participate in N-Ring topologies. QoS - Quality of Service provides prioritization of network traf c Industrial Packaging and Speci cations in order to provide better network service. The primary goal of QoS The 708FX2 is designed to operate in industrial environments. It is to improve the latency of prioritized Ethernet packets required is housed in a rugged steel DIN-Rail enclosure. It has extended for ring management, real-time, and other interactive applications. industrial specifications and features to meet or exceed the Trunking - Trunking (link aggregation) enables multiple physical operating parameters of the connected equipment. These include ports to be linked together and function as one uplink to another extended temperature ratings, extended shock and vibrations specs, N-TRON trunking capable switch con gured in the same manner, redundant power inputs, and high MTBF (greater than 2M hours). thereby increasing the bandwidth between switches. This con guration can provide increased bandwidth and redundancy to applications Ease of Use requiring high levels of fault tolerant operation. The 10/100BaseTX ports are auto sensing and auto configuring. Each copper port is automatically negotiated for maximum speed Port Mirroring - This function allows the traf c on one port to be and performance by default, but can also be hard coded using duplicated and sent to a designated mirror port. Port mirroring can the user interface. A high-speed processor allows wire speed be used to monitor Ethernet traf c on the designated source port capability on all 100BaseTX ports simultaneously. using the assigned mirror port.708FX2 Specifications THEINDUSTRIALNETWORKCOMPANY 708FX2 Speci cations Switch Properties Fiber Transceiver Characteristics Number of MAC Addresses: 8000 Fiber Length 2km* 15km** 40km** 80km** TX Power Min -19dBm -15dBm -5dBm -5dBm Aging Time: Programmable RX Sensitivity Max -31dBm -31dBm -34dBm -34dBm Latency Typical: 2.9 s Wavelength 1310nm 1310nm 1310nm 1550nm Switching Method: Store-and-Forward * Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable Physical Connectors Height: 2.3 (5.8cm) 10/100BaseTX: Six (6) RJ-45 Copper Ports Width: 6 (15.3cm) 100BaseFX: Two (2) SC or ST Fiber Duplex Ports Depth: 3.8 (9.6cm) Recommended Wiring Clearance Weight (max): 1.7 lbs (0.75kg) Front: 4 (10.16cm) DIN-Rail Mount: 35mm Side: 1 (2.54cm) Electrical Regulatory Approvals Redundant Input Voltage: 10-30 VDC FCC/CE (CFR 47, Part 15, Subpart B, Class A) Input Current (max): 330mA max 24VDC EN 55011 BTU/hr: 27 24VDC ICES-003- Class A N-TRON Power Supply: NTPS-24-1.3 (1.3 A 24V) EN61000-4-2/3/4/5/6/8/11, EN61000-6-2/4 Environmental UL /cUL: Class I, Div 2, Groups A, B, C, D and T4A o o Operating Temperature: -40 C to 85 C ANSI/ISA 12.12.01-2007 o o Storage Temperature: -40 C to 85 C ATEX II 3 G Ex nC (DEMKO 03 ATEX 0316686U) Operating Humidity: 5% to 95% ABS Type Approval for Shipboard Applications (Non Condensing) DNV Type Approval Certi cation Operating Altitude: 0 to 10,000 ft. EN50155 for Railway Applications Shock and Vibration (bulkhead mounted) GOST-R Certi ed Shock: 200g 10ms RoHS Compliant Vibration/Seismic: 50g, 5-200Hz, Triaxial Designed to comply with: Reliability IEEE 1613 for Electric Utility Substations MTBF: >2 Million Hours NEMA TS1/TS2 for Traf c Control Network Media 10BaseT: >Cat3 Cable 100BaseTX: >Cat5 Cable 100BaseFX Multimode: 50-62.5/125 m 100BaseFXE Singlemode: 7-10/125 m Contact Information N-TRON Corp. N-TRON Asia N-TRON Europe GmbH 820 S. University Blvd., Suite 4E Suite : 2267, 22/F, One Lujiazui Alte Steinhauserstr 19 Mobile, AL 36609 USA 68 Yin Cheng Road Center, 6330 Cham / Zg Switzerland TEL: (251) 342-2164 Pudong New Area TEL: +41 41 7406636 FAX: (251) 342-6353 200120 Shanghai, P.R. China FAX: +41 41 7406637 Website: www.N-TRON.com Phone: +86 (0) 21 6194 6777 Email: N-TRON info N-TRON.com Fax: +86 (0) 21 6194 6699 REV 100625 2010 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identi cation purposes only and may be trademarks and/or registered trademarks of their respective company. Speci cations subject to change without notice. The responsibility for the use and application of N-TRON products rests with the end user. N-TRON makes no warranties as to the tness or suitability of any N-TRON product for any speci c application. N-TRON Corporation shall not be liable for any damage resulting from the installation, use, or misuse of this product. Printed in USA.