DEV5P35021 Renesas

VersaClock 3S 5x3502x Family Development Kit User Manual Introduction The VersaClock 3S (VC3S) universal USB development kit is designed to support the 5x3502x family of VC3S devices. It provides a convenient way of verifying, configuring and programming the blank parts for all VC3S devices. The IDT Timing Commander GUI communicates to the devices for configuration and frequency validation on the board via an on-board USB interface. Using additional socket boards, a validated configuration is used to program blank parts for any of the VC3S devices. The table below shows the available VC3S development kits and their voltage ratings. Table 1. List of VersaClock 3S Family Development Kits Available Development Kit Part Number Product Applies to DEV5P35023 5P35023 DEV5P35021 5P35021 DEV5L35023 5L35023 DEV5L35021 5L35021 Development Kit Board Overview The USB development kit board is ready with all of the necessary components and connections to test the functionality of the configuration. See Figure 1 below and Table 2 for a list of component labels and descriptions. The devices can be programmed with the additional socket board as shown in Figure 2. Figure 1. Verification Boardtop view 2017 Integrated Device Technology, Inc. 1 May 4, 2017VersaClock 3S 5x3502x Family Development Kit User Manual Table 2. USB Development Kit Board Descriptions Label Number Label Name Description These are test points for single-ended outputs SE1, SE2, SE3 0 Single-ended Outputs and reference with GND test points in between. 1 DIP Switch Used to configure the device in different modes. A differential clock can be connected as the source for the device 2 Clock Inputs or a single-ended input connected on CLKINB pin. Used to mount a 24-pin or 20-pin socket board on the top of USB 3 Socket Connector board for programming. 4 25MHz Crystal Crystal with 8pF load (part number: 603-25-150) is populated. 5 Differential Output 2 The differential pair (out of phase) for DIFF-T2 and DIFF-C2. 6 IDT VersaClock 3S Device Device is populated on this programmer board. Used to mount a 24-pin or 20-pin socket board on the top of USB 7 Socket Connector board for programming. 8 Differential Output 1 The differential pair (out of phase) for DIFF-T1 and DIFF-C2. Used to mount a 24-pin or 20-pin socket board on the top of USB 9 Socket Connector board for programming. 10 LED1 LED to indicate VC3S chip is powered by USB port. Figure 2. Verification Board Connected with Socket Programming Board 2017 Integrated Device Technology, Inc. 2 May 4, 2017