EL7156CNZ Renesas

DATASHEET EL7156 FN7280 Rev 4.00 High Performance Pin Driver September 1, 2015 The EL7156 high performance pin driver with three-state is Features suited to many ATE and level-shifting applications. The 3.5A Clocking speeds up to 40MHz peak drive capability makes this part an excellent choice when driving high capacitance loads. 15ns t /t at 2000pF C R F LOAD 0.5ns rise and fall times mismatch The output pin OUT is connected to input pins VH or VL respectively, depending on the status of the IN pin. When the 0.5ns t -t prop delay mismatch ON OFF OE pin is active low, the output is placed in the three-state 3.5pF typical input capacitance mode. The isolation of the output FETs from the power 3.5A peak drive supplies enables VH and VL to be set independently, enabling level-shifting to be implemented. Related to the Low ON-resistance of 3.5 EL7155, the EL7156 adds a lower supply pin VS- and makes High capacitive drive capability VL an isolated and independent input. This feature adds Operates from 4.5V to 16.5V applications flexibility and improves switching response due to the increased enhancement of the output FETs. Pb-free plus anneal available (RoHS compliant) This pin driver has improved performance over existing pin Applications drivers. It is specifically designed to operate at voltages down to 0V across the switch elements while maintaining ATE/burn-in testers good speed and ON-resistance characteristics. Level shifting Available in the 8 Ld SOIC and 8 Ld PDIP packages, the IGBT drivers EL7156 is specified for operation over the full -40C to CCD drivers +85C temperature range. Pinout EL7156 (8 LD PDIP, SOIC) TOP VIEW VS+ 1 8 VH L OE 2 O 7 OUT G I IN 3 6 VL C GND 4 5 VS- Ordering Information PART NUMBER PART MARKING TAPE & REEL PKG PKG. DWG. EL7156CNZ (Note) EL7156CN Z - 8 Ld PDIP* (Pb-free) MDP0031 (No longer available, recommended replacement: EL7156CSZ) EL7156CSZ (Note) 7156CSZ - 8 Ld SOIC (Pb-free) MDP0027 EL7156CSZ-T7 (Note) 7156CSZ 7 8 Ld SOIC (Pb-free) MDP0027 EL7156CSZ-T13 (Note) 7156CSZ 13 8 Ld SOIC (Pb-free) MDP0027 NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. *Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications. FN7280 Rev 4.00 Page 1 of 11 September 1, 2015EL7156 Absolute Maximum Ratings (T = +25C) Thermal Information A Supply Voltage (V + to V -) .+18V Ambient Operating Temperature -40C to +85C S S Input Voltage . V - -0.3V, V +0.3V Operating Junction Temperature +125C S S Continuous Output Current 200mA Power Dissipation see curves Storage Temperature Range -65C to +150C Pb-free reflow profile see link below