DATASHEET HI-516 FN3146 Rev 4.00 16-Channel/Differential 8-Channel, CMOS High Speed Analog Multiplexer April 1, 2005 The Hl-516 is a monolithic, dielectrically isolated, high- Features speed, high-performance CMOS analog multiplexer. It Access Time (Typical) . 130ns offers unique built-in channel selection decoding plus an inhibit input for disabling all channels. The dual function of Settling Time 250ns (0.1%) address input A enables the Hl-516 to be user 3 Low Leakage (Typical) programmed either as a single ended 16-Channel -I 10pA S(OFF) multiplexer by connecting out A to out B and using A as 3 -I . 30pA D(OFF) a digital address input, or as an 8-Channel differential multiplexer by connecting A to the V- supply. The Low Capacitance (Max) 3 substrate leakages and parasitic capacitances are reduced -C . 10pF S(OFF) substantially by using the Intersil Dielectric Isolation -C . 25pF D(OFF) process to achieve optimum performance in both high and Off Isolation at 500kHz 55dB (Min) low level signal applications. The low output leakage o current (l < 100pA at 25 C) and fast settling Low Charge Injection Error . 20mV D(OFF) (t = 800ns to 0.01%) characteristics of the device SETTLE Single Ended to Differential Selectable (SDS) make it an ideal choice for high speed data acquisition Logic Level Selectable (LLS) systems, precision instrumentation, and industrial process control. Pb-Free Available (RoHS Compliant) For MIL-STD-883 compliant parts, request the Hl-516/883 Applications data sheet. Data Acquisition Systems Ordering Information Precision Instrumentation TEMP. PKG. o PART NUMBER RANGE ( C) PACKAGE DWG. Industrial Control HI3-0516-5 0 to 75 28 Ld PDIP E28.6 Pinout HI3-0516-5Z 0 to 75 28 Ld PDIP* E28.6 HI-516 (PDIP) (See Note) (Pb-free) TOP VIEW *Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder V+ 1 28 OUT A processing applications. OUT B 2 27 V- NC 3 26 IN 8/8A NOTE: Intersil Pb-free products employ special Pb-free material sets molding compounds/die attach materials and 100% matte tin IN 16/8B 4 25 IN 7/7A plate termination finish, which are RoHS compliant and compatible IN 15/7B 5 24 IN 6/6A with both SnPb and Pb-free soldering operations. Intersil Pb-free IN 14/6B 6 23 IN 5/5A products are MSL classified at Pb-free peak reflow temperatures that IN 13/5B 7 22 IN 4/4A meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 21 IN 3/3A IN 12/4B 8 IN 11/3B 9 20 IN 2/2A IN 10/2B 10 19 IN 1/1A IN 9/1B 11 18 ENABLE GND 12 17 A 0 V /LLS 13 16 A DD 1 A /SDS 14 15 A 3 2 FN3146 Rev 4.00 Page 1 of 8 April 1, 2005 NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PARTS DG406, DG407HI-516 Truth Tables HI-516 USED AS A 16-CHANNEL MULTIPLEXER OR DUAL 8-CHANNEL MULTIPLEXER (NOTE 1) HI-516 USED AS A DIFFERENTIAL 8-CHANNEL MULTIPLEXER USE A AS DIGITAL ADDRESS INPUT ON CHANNEL TO A CONNECTED TO V- SUPPLY ON CHANNEL TO 3 3 ENABLE A A A A OUT A OUT B ENABLE A A A OUT A OUT B 3 2 1 0 2 1 0 L XXXXNone None L X X X None None H LLLL1A None H L L L 1A 1B H LLLH 2A None H L L H 2A 2B H LLH L3A None H L H L 3A 3B H L L HH4A None H L H H 4A 4B H L H LL5A None H H L L 5A 5B H L HL H6A None H H L H 6A 6B H L H H L 7A None H H H L 7A 7B H L HHH8A None H H H H 8A 8B H H LLLNone 1B H H L L H None 2B H H L H L None 3B H H L H H None 4B H H H L L None 5B H HHL HNone 6B H HHHL None 7B H HHHHNone 8B NOTE: 1. For 16-channel single-ended function, tie out A to out B for dual 8-channel function use the A address pin to select 3 between MUX A and MUX B, where MUX A is selected with A 3 low. FN3146 Rev 4.00 Page 2 of 8 April 1, 2005