HXR6104 4 Channel 16Gb/s Receiver Product Brief General Description Features -12 The HXR6104 Transimpedance Limiting Amplifier 20 A sensitivity for 10 BER at 10.3 Gbps PP 60 mW/ch power consumption at low setting array is a member of IDTs family of Optical Receiver Automatic gain and threshold control Transmitter Array (ORTA) products targeted at the 3 mA minimum peak to peak overload PP parallel optical links market. Together with a PIN Adjustable CML output stage amplitude detector array or discrete detectors, high capacity, Adjustable output pre-emphasis amplitude and high availability optical links can be designed for duration telecom and datacom applications. Adjustable signal detect threshold & SQUELCH The 3.3V SiGe device integrates the trans- Independent RSSI per channel output impedance pre-amplifier, the limiting post-amplifier Independent per channel temperature monitor Data polarity inversion per channel and a versatile CML output stage for four optical Optimized for isolated and common cathode input channels. photo-detector arrays from multiple vendors Control lines accessible on both sides of the die QSFP MSA compliance Applications IEEE 802.3ba Ethernet Transceivers Ordering Information InfiniBand QDR & FDR Active Cables Part Temp Range Pin-Package Proprietary multi-channel optical modules Bare Die HXR6104-DNT 0C to +85C 2.05mm x 1.67mm HXR6104-EVB Room Temp Evaluation Board For price, delivery schedules, and to place orders, please contact IDT: www.IDT.com/go/sales Device Diagram Figure 1: Device diagram 2017 Integrated Device Technology, Inc. 1 May 17, 2017 Corporate Headquarters Sales Tech Support 6024 Silver Creek Valley Road 1-800-345-7015 or 408-284-8200 www.IDT.com/go/support San Jose, CA 95138 Fax: 408-284-2775 www.IDT.com www.IDT.com/go/sales DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as IDT) reserve the right to modify the products and/or specifications described herein at any time, without notice, at IDT s sole discretion. Performance specifications and operati ng parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of a ny kind, whether express or implied, including, but not limited to, the suitability of IDT s products for any particular purpose, an implied warranty of merchantability, or non -infringement of the intellectual property rights of others. This document is presented o nly as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated Device Technology, Inc. All rights reserved.