Starter Kit User Manual IPS2200 Inductive Position Sensing Description Features The IPS2200 Inductive Position Sensing Starter Kit USB plug and play no driver installation needed supports evaluation of the IDT IPS2200 IC via its application module, IPS2-COMBOARD and Small IPS2-COMBOARD IPS2200 Eval-Kit software (GUI). I2C and SPI communication interfaces enable IPS2200 Evaluation Kit enables communication quick and easy configuration and calibration of the IPS2200 using the users computer between users computer (via GUI) and the IPS2200 IC. The user can send commands and High speed reading of the analog output data via computers USB port to the IPS2- signals. COMBOARD. The modular design allows user to conveniently swap different IPS2200 Application Modules. The microcontroller on the IPS2-COMBOARD IPS2-COMBOARD and IPS2200 Software interprets these commands and relays them to the (GUI) remains the same for different application IPS2200 using I2C or SPI communication modules. interfaces. The kit software is available for download from The microcontroller also forwards data bytes from the IDT product page for the IPS2- the IPS2200 back to the computer (GUI). These COMBOARD: www.IDT.com/IPS2-COMBOARD bytes can be analog signal readings, IPS2200 Kit Contents internal registers values, or IPS2200 EEPROM contents. IPS2-COMBOARD The IPS2200 Application Software is a graphical IPS2200MROT4x90001 user interface (GUI) that is provided online for the Micro-USB cable kit. It supports all IPS2200 configurations and Two interface cables enables the user to understand the functionality of the IPS2200 as well as perform measurements. Figure 1. IPS2-COMBOARD and IPS2200MROT4x90001 Application Module Mar.10.20 Page 1 IPS2200 Important Notes Disclaimer Integrated Device Technology, Inc. and its affiliated companies (herein referred to as IDT) shall not be liable for any damages arising out of defects resulting from (i) delivered hardware or software (ii) non-observance of instructions contained in this manual and in any other documentation provided to user, or (iii) misuse, abuse, use under abnormal conditions, or alteration by anyone other than IDT. TO THE EXTENT PERMITTED BY LAW, IDT HEREBY EXPRESSLY DISCLAIMS AND USER EXPRESSLY WAIVES ANY AND ALL WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, STATUTORY WARRANTY OF NON-INFRINGEMENT, AND ANY OTHER WARRANTY THAT MAY ARISE BY REASON OF USAGE OF TRADE, CUSTOM, OR COURSE OF DEALING. Restrictions in Use IDTs IPS2XXX Evaluation Kit, consisting of the IPS-COMBOARD and micro-USB cable used in combination with the IPS2XXX Application Module and the IPS2XXX AID EVKIT Application Software, is designed for evaluation and configuration of the IPS2XXX product family only. IDTs IPS2XXX Evaluation Kit hardware and software must not be used for characterization measurements in terms of replacing calibrated laboratory environment and measurement devices. Important Safety Warning: These procedures can result in high currents, which can cause severe injury or death and/or equipment damage. Only trained professional staff should connect external equipment and operate the software. Important Equipment Warning: Ensure the correct connection of all cables. Supplying the board using the wrong polarity could result in damage to the board and/or the equipment. Mar.10.20 Page 2