ISL54228IRUZ-T7A Renesas

ISL54228 High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP) ISL54228 Features High-Speed (480Mbps) and Full-Speed (12Mbps) The Intersil ISL54228 is a single supply, dual SPST Signaling Capability per USB 2.0 (Single Pole/Single Throw) switch that is configured as a DPST. It can operate from a single 2.7V to 5.25V supply. 1.8V Logic Compatible (2.7V to +3.6V Supply) The part was designed for switching or isolating a USB Low Power State high-speed source or a USB high-speed and full-speed Power OFF Protection source in portable battery powered products. COM Pins Overvoltage Detection and Protection for The 3.5 SPST switches were specifically designed to +5.25V and -5V Fault Voltages pass USB full speed and USB high speed data signals. -3dB Frequency 790MHz They have high bandwidth and low capacitance to pass USB high speed data signals with minimal distortion. Low ON Capacitance 240MHz 2pF The device has two logic control pins (OE and LP) to Low ON-Resistance 3.5 control the SPST switches. Single Supply Operation (V ) 2.7V to 5.25V DD The ISL54228 has OVP detection circuitry on the COM Available in TQFN and TDFN Packages pins to open the SPST switches when the voltage at Pb-Free (RoHS Compliant) these pins exceeds 3.8V or goes negative by -0.45V. It Compliant with USB 2.0 Short Circuit and isolates fault voltages up to +5.25V or down to -5V from Overvoltage Requirements Without Additional getting passed to the other-side of the switch, thereby External Components protecting the USB down-stream transceiver. The ISL54228 is available in 8 Ld 1.2mmx1.4mm Applications*(see page 15) TQFN and 8 Ld 2mmx2mm TDFN packages. It operates MP3 and other Personal Media Players over a temperature range of -40C to +85C. Cellular/Mobile Phones, PDAs Digital Cameras and Camcorders USB Switching Typical Application USB 2.0 HS Eye Pattern with Switches in the Signal Path 3.3V 500 VDD LP LOGIC P CONTROL OE VBUS D- COM - D- USB OVP HIGH-SPEED DET TRANSCEIVER D+ D+ COM + ISL54228 GND GND TIME SCALE (0.2ns/DIV) July 29, 2010 CAUTION: These devices are sensitive to electrostatic discharge follow proper IC Handling Procedures. 1 1-888-INTERSIL or 1-888-468-3774 Intersil (and design) is a registered trademark of Intersil Americas Inc. FN7628.0 Copyright Intersil Americas Inc. 2010. All Rights Reserved All other trademarks mentioned are the property of their respective owners. USB CONNECTOR VOLTAGE SCALE (0.1V/DIV)ISL54228ISL54228 Pin Configurations ISL54228 ISL54228 (8 LD 1.2x1.4 TQFN) (8 LD 2x2 TDFN) TOP VIEW TOP VIEW PD LP VDD 1 8 OVP LOGIC 4M 4M D+ OE 2 7 D- 1 5 D+ 3 D- COM+ 6 LOGIC OVP GND 4 5 COM- 4M 4M NOTE: Switches Shown for OE = Logic 0. Pin Descriptions TQFN TDFN PIN NAME DESCRIPTION 4 1 LP Low Power Input 5 2 D+ USB Data Port 6 3 COM+ USB Data Port 74 GND Ground Connection 8 5 COM- USB Data Port 1 6 D- USB Data Port 27 OE Switch Enable 3 8 VDD Power Supply - PD PD Thermal Pad. Tie to Ground or Float Truth Table INPUT OUTPUT SIGNAL AT COM PINS LP OE D-, D+ STATE 0V to 3.6V 0 0 OFF Normal 0V to 3.6V 0 1 ON Normal 0V to 3.6V 1 0 OFF Low Power 0V to 3.6V 1 1 ON Normal Overvoltage Range 0 0 OFF OVP Overvoltage Range 0 1 OFF OVP Overvoltage Range 1 0 OFF Neg OVP Limited Positive OVP No Persistence Checking Low Power Overvoltage Range 1 1 OFF OVP NOTE: Logic 0 when 0.5V, Logic 1 when 1.4V with a 2.7V to 3.6V Supply. FN7628.0 2 July 29, 2010 OE 8 COM - 2 VDD GND 3 7 LP 4 6 COM +