DATA SHORT To request the full datasheet, please visit www.intersil.com/products/isl95833b ISL95833B FN8561 Rev 0.00 Dual 2+1 PWM Controller for IMVP-7/VR12 CPUs June 24, 2013 The ISL95833B Pulse Width Modulation (PWM) controller IC Features provides a complete solution for IMVP-7/VR12 compliant Serial data bus microprocessor and graphic processor core power supplies. It provides the control and protection for two Voltage Regulators Dual outputs: (VRs). The first VR, typically for V , incorporates 1 CORE - Configurable 2- or 1-phase for the 1st output using one integrated driver and can operate in 2- or 1-phase integrated gate driver configurations. The second VR, typically for graphics, is a - 1-phase for the 2nd output using an integrated gate driver single phase regulator incorporating an integrated driver. The two VRs share a serial control bus to communicate with the R3 Modulator CPU and achieve lower cost and smaller board area compared - Excellent transient response with the two-chip approach. - High light load efficiency Both VRs utilize Intersil s Robust Ripple Regulator 0.5% system accuracy over-temperature R3 Technology. The R3 modulator has numerous advantages Supports multiple current sensing methods compared to traditional modulators, including faster transient response, variable switching frequency during load transients, - Lossless inductor DCR current sensing and improved light load efficiency due to its ability to - Precision resistor current sensing automatically change switching frequency. Differential remote voltage sensing The ISL95833B has several other key features. Both outputs Programmable VBOOT voltage at start-up support either DCR current sensing with a single NTC Resistor programmable IMAX and switching frequency thermistor for DCR temperature compensation, or more (400kHz ~ 600kHz) for both outputs precise resistor current sensing if desired. Both outputs come with remote voltage sense, programmable VBOOT voltage, Adaptive body diode conduction time reduction IMAX, and switching frequency, adjustable overcurrent protection and separate Power-Good signals. Applications IMVP-7/VR12 compliant computers V IN VR2 V IN 0.91 V = 19V IN 0.90 VR1 0.89 ISL6208 ISL95833B 0.88 DRIVER 0.87 0.86 0.85 V IN 0.84 0.83 V = 12V IN 0.82 V = 8V IN 0.81 0.80 0612 18 24 30 36 42 48 54 60 66 I (A) OUT FIGURE 1. SIMPLIFIED APPLICATION CIRCUIT FIGURE 2. LOAD LINE REGULATION FN8561 Rev 0.00 Page 1 of 2 June 24, 2013 V (V) OUTISL95833B Copyright Intersil Americas LLC 2013. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. For additional products, see www.intersil.com/en/products.html Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil s sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com FN8561 Rev 0.00 Page 2 of 2 June 24, 2013