Datasheet R01DS0192EJ0220 RL78/L1C Rev.2.20 RENESAS MCU Dec 28, 2017 Integrated LCD controller/driver, 12-bit resolution A/D Converter, USB 2.0 controller (function), True Low Power Platform (as low as 112.5 A/MHz, and 0.68 A for RTC2 + LVD), 1.6 V to 3.6 V operation, 64 to 256 Kbyte Flash, 33 DMIPS at 24 MHz, for All LCD Based Applications 1. OUTLINE 1.1 Features Ultra-low power consumption technology Timers VDD = single power supply voltage of 1.6 to 3.6 V 16-bit timer: 11 channels HALT mode 12-bit interval timer: 1 channel STOP mode Real-time clock 2: 1 channel (calendar for 99 years, alarm function, SNOOZE mode and clock correction function) Watchdog timer: 1 channel (operable with the dedicated low-speed RL78 CPU core on-chip oscillator) CISC architecture with 3-stage pipeline Minimum instruction execution time: Can be changed from high LCD controller/driver speed (0.04167 s: 24 MHz operation with high-speed on-chip Internal voltage boosting method, capacitor split method, and oscillator clock or PLL clock) to ultra-low speed (30.5 s: 32.768 external resistance division method are switchable. Note 1 Note 1 kHz operation with subsystem clock) Segment signal output: 44 (40) to 56 (52) Multiply/divide and multiply/accumulate instructions are supported. Note 1 Common signal output: 4 (8) Address space: 1 Mbyte General-purpose registers: (8-bit register 8) 4 banks Note 2 USB On-chip RAM: 8 to 16 KB USB version 2.0 (function controller) Full-speed transfer (12 Mbps) and low-speed transfer (1.5 Mbps) are Code flash memory supported Code flash memory: 64 to 256 KB Compliant to Battery Charging Specification Revision 1.2 Block size: 1 KB Prohibition of block erase and rewriting (security function) A/D converter On-chip debug function 8/10-bit resolution A/D converter (VDD = 1.6 to 3.6 V) Self-programming (with boot swap function/flash shield window 12-bit resolution A/D converter (VDD = 2.4 to 3.6 V) function) Analog input: 9 to 13 channels Note 2 Internal reference voltage (TYP. 1.45 V) and temperature sensor Data flash memory Data flash memory: 8 KB D/A converter Background operation (BGO): Instructions can be executed from the 8-bit resolution D/A converter (VDD = 1.6 to 3.6 V) program memory while rewriting the data flash memory. Analog output: 2 channels Number of rewrites: 1,000,000 times (TYP.) Output voltage: 0 V to VDD Voltage of rewrites: VDD = 1.8 to 3.6 V Real-time output function High-speed on-chip oscillator Comparator Select from 48 MHz, 24 MHz, 16 MHz, 12 MHz, 8 MHz, 6 MHz, 4 2 channels MHz, 3 MHz, 2 MHz, and 1 MHz Operating modes: Comparator high-speed mode, comparator low- High accuracy: 1.0% (VDD = 1.8 to 3.6 V, TA = -20 to +85C) speed mode, window mode The external reference voltage or internal reference voltage can be Operating ambient temperature selected as the reference voltage. TA = -40 to +85C (A: Consumer applications) TA = -40 to +105C (G: Industrial applications) I/O ports I/O ports: 59 to 77 (N-ch open drain I/O withstand voltage of 6 V : 2) Power management and reset function Can be set to N-ch open drain, TTL input buffer, and on-chip pull-up On-chip power-on-reset (POR) circuit resistor On-chip voltage detector (LVD) (Select interrupt and reset from 12 On-chip key interrupt function levels) On-chip clock output/buzzer output controller Data transfer controller (DTC) Others Transfer modes: Normal transfer mode, repeat transfer mode, block On-chip BCD (binary-coded decimal) correction circuit transfer mode Activation sources: Activated by interrupt sources (30 to 33 sources). Note 1. The number in parentheses indicates the number of Chain transfer function signal outputs when 8 coms are used. Note 2. Selectable only in HS (high-speed main) mode. Event link controller (ELC) Event signals of 30 or 31 types can be linked to the specified peripheral function. Remark The functions mounted depend on the product. See 1.6 Outline of Functions. Serial interfaces CSI: 4 channels UART/UART (LIN-bus supported): 4 channels 2 2 I C/simplified I C: 5 channels R01DS0192EJ0220 Rev.2.20 Page 1 of 147 Dec 28, 2017RL78/L1C 1. OUTLINE ROM, RAM capacities Products with USB RL78/L1C Flash ROM Data Flash RAM pins 80 pins 85 pins 100 Note 256 KB 8 KB R5F110MJ R5F110NJ R5F110PJ 16 KB Note 192 KB 8 KB R5F110MH R5F110NH R5F110PH 16 KB 128 KB 8 KB 12 KB R5F110MG R5F110NG R5F110PG 96 KB 8 KB 10 KB R5F110MF R5F110NF R5F110PF 64 KB 8 KB 8 KB R5F110ME R5F110NE R5F110PE Products without USB RL78/L1C Flash ROM Data Flash RAM 80 pins 85 pins pins 100 Note 256 KB 8 KB R5F111MJ R5F111NJ R5F111PJ 16 KB Note 192 KB 8 KB R5F111MH R5F111NH R5F111PH 16 KB 128 KB 8 KB 12 KB R5F111MG R5F111NG R5F111PG 96 KB 8 KB 10 KB R5F111MF R5F111NF R5F111PF 64 KB 8 KB 8 KB R5F111ME R5F111NE R5F111PE Note This is about 15 KB when the self-programming function and data flash function are used (For details, see CHAPTER 3 in the RL78/L1C Users Manual). R01DS0192EJ0220 Rev.2.20 Page 2 of 147 Dec 28, 2017