IDT XO HCMOS Crystal Oscillator XLH DATASHEET Description Features The XLH is an HCMOS Crystal Oscillator with 750fs typical Frequency range: 0.750 to 250MHz phase jitter over 12kHz to 20 MHz bandwidth. Available in a Output Type: HCMOS/LVCMOS Compatible wide frequency range from 0.750MHz to 250MHz, the IDT Frequency Stability: 20ppm, 25ppm, 50ppm, or 100 XLH Series Crystal Oscillator utilizes a family of proprietary ppm ASICs, with a key focus on noise reduction technologies. Supply Voltage: 2.5V or 3.3V Phase Jitter (1.875MHz to 20MHz): 225fs typical The 3rd order Delta Sigma Modulator reduces noise to the Phase Jitter (12kHz to 20MHz): 750fs typical levels that are comparable to traditional Bulk Quartz and SAW oscillators. With short lead-time, low cost, low noise, wide Package options: 3.2mm x 2.5mm x 1.0mm (JX4) frequency range, excellent ambient performance, the XLH is 5.0mm x 3.2mm x 1.2mm (JS4) an excellent choice over the conventional technologies. The 7.0mm x 5.0mm x 1.3mm (JU4) XLH has stabilities as tight as 20ppm with extremely quick Operating Temperatures: -20C to +70C or -40C to +85C delivery for both standard and custom frequencies Pin Assignment 4 3 12 6-pin CLCC Pin Descriptions Pin Number Pin Name Description 1 1 E/D Enable/Disable (0=Output Disabled) 2 GND Connect to ground 3 OUT Output 4 VDD Supply voltage 1. Pulled high internally. XLH JUNE 20, 2017 1 2017 Integrated Device Technology, Inc. E/D VDD NC NC GND OUTXLH DATASHEET Absolute Maximum Ratings Stresses above the ratings listed below can cause permanent damage to the XLH. These ratings, which are standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range. Item Rating VDD -0.5 to +5.0V E/D -0.5 V to VDD + 0.5V OUT -0.5 V to VDD + 0.5 Storage Temperature -55C to 125C Theta Ja (Junction to Ambient) 102C/W Still Air ESD Compliance Human Body Model (HBM 1000V Machine Model (MM) 150V Mechanical Testing Parameter Test Method Mechanical Shock Drop from 75cm to hardwood surface3 times Mechanical Vibration 10~55Hz, 1.5mm amplitude, 1 minute sweep 2 hours each in 3 directions (X, Y, Z) High Temperature Burn-in Under power at 125C for 2000 hours 2 Hermetic Seal He pressure: 4 1kgf/cm 2 hour soak Solder Reflow Profile t P 10 seconds Max within 5C of 260C peak 260C Ramp up 3C/s Max Ramp down not 225C 50 10 to exceed 6C/s 180C seconds above 225C reflow area 120 20 seconds 160C in pre-heating area 25C 400 seconds MAX from +25C to 260C peak IDT XO HCMOS CRYSTAL OSCILLATOR 2 JUNE 20, 2017