High-Performance Video Signal Switchers Triple-circuit Video Switchers No.11066EAT02 BA7602F,BA7603F,BA7606F,BA7606FS,BA7607F,BA7609F,BA7627FV Description These video switching ICs, which contain two or three 2-input circuits, were developed for switching TV, DVD, and other video signals. Input pin formats can be selected from bias mode (R=20 k), sync-tip mode, and pedestal clamp mode. Having a large dynamic range and broad frequency characteristics, these switches are suited to a wide range of applications from audio signals to video signals. Features 1) Contain three 2-input, 1-output switch circuits 2) Power supply voltage (4.5~5.5 V) 3) Low power consumption 4) Good frequency characteristics 5) Large dynamic range 6) Bias input (BA7602F) Sync-tip clamp input (BA7603F) Pedestal clamp input (BA7606F, BA7606FS) Bias input + sync-tip clamp input (BA7607F, BA7609F, BA7627FV) 7) Large input impedance (Typ.20k) 8) Fast switching speed (Typ. 50ns) Applications For switching TV, DVD, and Other video signals Line up matrix Maximum Circuit current Distortion Part No. Built-in circuit Input type output level Package (mA) (%) (V ) P-P BA7602F 14.0 2 in 3 circuits Bias 3.1 SOP16 BA7603F 13.0 2 in 3 circuits Clamp 2.9 SOP16 BA7606F Pedestal SOP16/ 15.0 2 in 3 circuits 2.6 BA7606FS Clamp SSOP-A16 Clamp 2 BA7607F 12.5 2 in 3 circuits 0.007 3.0 SOP16 Bias1 Clamp 1 BA7609F 12.5 2 in 3 circuits 0.007 3.0 SOP16 Bias 2 Clamp 2 BA7627FV 12.5 2 in 3 circuits 0.007 3.0 SSOP-B16 Bias1 www.rohm.com 2011.03 - Rev.A 1/10 2011 ROHM Co., Ltd. All rights reserved. Technical Note BA7602F,BA7603F,BA7606F,BA7606FS,BA7607F,BA7609F,BA7627FV Absolute Maximum Ratings (Ta=25) Parameter Symbol Ratings Unit Supply voltage Vcc 9 V BA7602F BA7603F *1 BA7606F 500 Power BA7607F Pd mW dissipation BA7609F *2 BA7606FS 650 *1 BA7627FV 450 Operating temperature Topr 4085 Storage temperature Tstg 55125 *1 Deratings is done at 5.0mW/ above Ta=25.(BA7603F, BA7606F, BA7607F, BA7609F, BA7627FV) *2 Deratings is done at 6.5mW/ above Ta=25.(BA7606FS) Operating Range (Ta=25) Ratings Parameter Symbol Unit Min. Typ. Max. Supply voltage Vcc 4.5 5.0 5.5 V Electrical characteristics (Unless otherwise noted, Ta=25 and Vcc=5.0V) Limits (Typ.) Parameter Symbol Unit Conditions 06F/ 02F 03F 07F 09F 27FV 06FS Circuit current Icc 14.0 13.0 15.0 12.5 mA Maximum f=1kHz, THD=0.5%, Clamp Vom1 2.9 2.9 V P-P output level1 with clamp Maximum f=1kHz, THD=0.5%, Bias Vom2 3.1 3.0 V P-P output level2 without clamp Maximum Pedestal Dynamic range VomU 1.65 V P-P output level U clamp on positive side of clamp level Maximum Pedestal Dynamic range VomD 0.95 V P-P output level D clamp on negative side of clamp level Voltage gain Gv 0 dB f=1MHz, V =1 V IN P-P Interchannel crosstalk C -65 dB f=4.43MHz, V =1 V T IN P-P Frequency characteristic Gf 0 -1 0 dB 10MHz/1MHz, V = V IN P-P f=1kHz, 1Vp-p, Total harmonic distortion THD 0.007 % Bias type CTL pin switching level V 2.5 V H: IN1 L: IN2 TH Clamp input level V L0.75 H2.2 V Only BA7606F, BA7606FS ct www.rohm.com 2011.03 - Rev.A 2/10 2011 ROHM Co., Ltd. All rights reserved.