BH6260MWX-E2 ROHM

USB Switch ICs SPST Type (Single Pole Single Throw) No.11103EAT04 BH6260MWX Description BH6260MWX is SPST x 2ch and Inverter x 2ch analog switches. Analog SW0 and SW1 pass USB 2.0 high-speed signal. Analog SW2 and SW3 pass UART signal. Moreover, this is guaranteed from 2.9V to 3.7V as for the range of the power-supply voltage. Enable signals ENB0, ENB1, EN2, and EN3 can control Analog SW0, SW1, SW2, and SW3. Furthermore, this is able to pass USB 2.0 high-speed signal without distortion, because of Analog SW0 and SW1 are low capacitance. The electrostatic discharge protection circuit is built-in in all terminals. Features 1) 5 switches connect inputs to outputs 2) Low Capacity Analog SW 2ch with clamp Diode 3) 1.8V Output Inverter 2ch 4) 16-Pin SON Package (3.3mm x 1.5mm, Height=0.6mm, 0.4mm pitch) 5) It contributes to the miniaturization because all external is built into. Applications Digital Still Cameras, Digital Video Camcorders, Portable Navigation Devices, TV, Portable DVD Players, Portable Game Systems, Personal computers, PDA, Mobile phones Line up matrix Parameter BH6260MWX BD11600NUX BD11603MWX BD11601NUX Supply Quiescent Current 0 A 18 A 18 A 18 A Input voltage range 2.93.7 V 2.55.5 V 2.55.5 V 2.55.5 V Switch ON Resistance 5 3 3 2.5 ( VIN=0 V ) Switch ON Capacitance 10 pF 6 pF 7 pF 6 pF SPST x 2ch Configuration DPDT MUX x 2Lines DPST and Inverter x 2ch Package USON016X3315VSON010X3020USON016X3315 VSON008X2020 Absolute maximum ratings (Ta=25) Parameter Symbol Ratings Unit Conditions VDD,VDD18,B2,ENB0 Input supply voltage1 Vmax1 -0.35.5 V ENB1,EN2,EN3 Input supply voltage2 Vmax2 -0.3VDD+0.3 V A0,B0,A1,B1,A3 Input supply voltage3 Vmax3 -0.3VDD18+0.3 V B3 Input supply voltage4 Vmax4 -0.3VDD+0.3 V A2 *3 Input supply voltage5 Vmax5 -0.3VDD18+0.3 V A2 *4 Power dissipation Pd 850 mW *1 Operating temperature range Topr -40+85 Storage temperature range Tstr -55+125 *1 When using more than at Ta=25, it is reduced 8.5 mW per 1. ROHM specification board 70mm 70mm mounting. www.rohm.com 2011.08 - Rev.A 1/9 2011 ROHM Co., Ltd. All rights reserved. Technical Note BH6260MWX Operating conditions (Ta=-40+85) Parameter Symbol Ratings Unit Conditions Input voltage range (VDD) VDD 2.93.7 V Input voltage range (VDD18) VDD18 1.73.6 V * This product does not especially designed to be protected from radioactivity Electrical characteristics (Unless otherwise noted, Ta = 25, VDD=3.3V, VDD18=1.8V) Limits Parameter Symbol Unit Conditions Min. Typ. Max. Total VDD=3.3V, Supply Quiescent Current 1 ICC1 - 0 10 A ENB0/1:L, EN2/3:H VDD=3.3V, Supply Quiescent Current 2 ICC2 - 0 10 A ENB0/1:H, EN2/3:L Switch ON Resistance 1 Ron1 - 5 10 VIN=0V Switch ON Resistance 2 Ron2 - 8 13 VIN=2.4V Switch OFF Capacitance (A2, A3) Coff - 5.0 - pF f=1MHz Switch ON Capacitance (A0, A1) Con - 10 - pF f=1MHz 0.25 INV2 Input L level VILBUF2 - - V VDD18 0.75 INV2 Input H level VIHBUF2 - - V VDD18 INV2 Output L level VOLBUF2 - 0.15 0.3 V Io=3mA INV2 Output H level VOHBUF2 1.50 1.65 - V Io=-3mA 0.25 INV3 Input L level VILBUF3 - - V VDD18 0.75 INV3 Input H level VIHBUF3 - - V VDD18 INV3 Output L level VOLBUF3 - 0.15 0.3 V Io=3mA INV3 Output H level VOHBUF3 1.50 1.65 - V Io=-3mA 0.75 ENBn/ENn input H level VIHENB - - V VDD 0.25 ENBn/ENn input L level VILENB - - V VDD INV3 Input Resister RININV3 50 100 150 k EN3:H Clamp Diode Voltage1 VIK1 -1.2 -0.73 - V Clamp Diode Voltage2 VIK2 - 0.73 1.2 V A0,B0,A1,B1,A2,A3 Propagation Delay (*1) tPLH, tPHL - - 0.25 ns CL=50pF,RL=500 BUS Enable Time (*1) tPZH, tPZL - - 200 ns CL=50pF,RL=500 BUS Disable Time (*1) tPHZ, tPLZ - - 200 ns CL=50pF,RL=500 www.rohm.com 2011.08 - Rev.A 2/9 2011 ROHM Co., Ltd. All rights reserved.