1/4 Structure Silicon Monolithic Integrated Circuit Product name Low voltage operation wide band 3-outputs video driver with LPF Type BH7606GU Function Built in 3-output video drivers for Y, PB and PR signal Built in 6dB AMP Built in standby function (0A TYP) Built in LPF (Y : fc=27MHz, PB/PR : fc=15MHz) No output coupling capacitor required Small package 15-Bump WL-CSP(2.26x2.26x1.0 mm ) Radiation resistance is not included in the design. Absolute Maximum Ratings Ta=25 Parameter Symbol Limits Unit Condition CP VCC Supply voltage Vcp 3.55 CP VCC - (CP GND or V GND) V VCC Supply voltage Vv 3.55 V V VCC - ( CP GND or V GND) V VCC to CP VCC voltage Vcc -0.3+0.3 V V VCC - CP VCC V GND to CP GND voltage Vgg 0 V V GND - CP GND Input voltage 1 Vin1 -0.3~(V VCC+0.3) V STBY (VEE IN)-0.3 Input voltage 2 Vin2 V Y IN, PB IN, PR IN ~(V VCC+0.3) Power dissipation Pd 920 W Storage temperature Tstg -55+125 In case mounting on a (110mm 100mm 1.6mm) grass-epoxy PCB. Reduced by 9.2 mW/ C at 25C or higher. Operating range Ta=25 Parameter SymbolRating. Unit CP VCC Supply voltage Vcpo 2.85 ~ 3.45 V VCC Supply voltage Vvo 2.85 ~ 3.45 Operating temperature Topr -40 ~ +85 REV. A 2/4 Electrical characteristics Unless otherwise noted, Ta=25CP VCC=V VCC=3V Limits Parameter Symbol Unit conditions Min. Typ. Max. ACTIVE Icc 50 70 90 mA No signal 1 Circuit current STANDBY Icc 0 2 A Standby mode 2 Y/PB/PR OUT Voltage gain G 5.5 6.0 6.5 dB Vin=1.0Vpp , f=100kHz V Y/PB/PR OUT Maximum output level V 3.2 4.0 Vp-p THD=1%, f=10kHz omv Y OUT Frequency characteristics 1 G -4.5 -1.5 1.0 dB Vin=1.0Vpp , f=27M/100kHz f1Y PB OUT Frequency characteristics 1 G -3.0 -1.0 1.0 dB Vin=1.0Vpp , f=15M/100kHz f1PB PR OUT Frequency characteristics 1 G -3.0 -1.0 1.0 dB Vin=1.0Vpp , f=15M/100kHz f1PR Y OUT Frequency characteristics 2 G -26 -15 dB Vin=1.0Vpp , f=54M/100kHz f2Y PB OUT Frequency characteristics 2 G -35 -28 dB Vin=1.0Vpp , f=54M/100kHz f2PB PR OUT Frequency characteristics 2 G -35 -28 dB Vin=1.0Vpp , f=54M/100kHz f2PR C -70 -50 dB Vin=1.0Vpp , f=4.43MHz Cross talk T Y/PB/PR IN Input impedance R 100 150 200 k Y/PB/PR INV GND inV Y/PB/PR OUT Output DC offset V -100 0 100 mV Terminated 75 off V VCC STBY Input voltage H V V VCC V ACTIVE mode thH -1.2 STBY Input voltage L V 0.0 0.45 V STANDBY mode thL STBY Input impedance R 100 150 200 k STBYV GND inST Control pin settings Parameter Status Operational mode H ACTIVE L STANDBY (B3) STANDBY OPEN REV. A