BH76071FJ-E2 ROHM

High-Performance Video System Drivers 4-output DVD System Video Driver No.11065EAT09 BH76071FJ Description The BH76071FJ is a system video driver that integrated three output wideband video drivers with built-in LPF corresponding to the high-definition television and one output video driver with built-in LPF corresponding to the composite video signal in 1chip. It is suitable for the set not equipped with type S terminal. Features 1) Built-in 4-output video driver, supporting PY, PB, PR, and CVBS 2) Supports D4 broadband standard 3) Built-in 6 dB amp th th th 4) Built-in LPF for noise elimination (component: f = 30 MHz(8 )/13.5 MHz(6 ), composite: f = 6.75 MHz(6 )) 5) Built-in mute function 6) Enables two load drivers per driver channel 7) Usable for output capacitor less drivers (only 1 channel at same time) Applications DVD/BD players, DVD/BD recorders, and other video devices such as DSC, DVC, STB, TV Absolute Maximum Ratings Parameter Symbol Ratings Unit Supply voltage VCCmax 7.0 V *1 Power dissipation Pd 820 mW Input voltage VIN -0.3 to (VCC+0.3) V Storage temperature Tstg -55 to +125 *1 When mounted on a 70 mm 70 mm 1.6 mm glass epoxy substrate(1layer). Reduced by 8.2 mW per 1 when Ta =25 or higher. Operation Range Parameter Symbol Ratings Unit Supply voltage VCC 4.5 to 5.5 Operating temperature Topr -40 to +85 www.rohm.com 2011.01 - Rev.A 1/24 2011 ROHM Co., Ltd. All rights reserved. BH76071FJ Technical Note Electrical Characteristics (unless otherwise noted, Ta = 25,VCC = 5V) Limits Parameter Symbol Unit Conditions MIN TYP MAX No signal, 30 MHz LPF is selected VCC current 1 ICC1 32 45 58 mA during 4ch ACT No signal, 30 MHz LPF is selected *2 VCC current 2 ICC2 45 mA during CVBS OUT MUTE *2 No signal, 30 MHz LPF is selected VCC current 3 ICC3 45 mA during component MUTE No signal, 13.5 MHz LPF is selected *2 VCC current 4 ICC4 45 mA during 4ch ACT CVBS OUT voltage gain GV1 5.5 6.0 6.5 dB Vin=1.0Vp-p, f=100kHz PY/PB/PR OUT voltage gain GV2 5.5 6.0 6.5 dB Vin=0.7Vp-p, f=100kHz Maximum output level VomV 2.6 2.9 Vp-p THD=1 % f=10kHz 6.75 MHz LPF frequency Gf1675 -1.5 -0.5 0.5 dB Vin=1.0Vp-p, f=6.75MHz/100kHz characteristics 1 13.5MHz LPF frequency f1135 -1.5 -0.5 0.5 dB Vin=0.7Vp-p, f=13.5M/Hz100kHz G characteristics 1 30MHz LPF frequency Gf1300 -3.0 -1.0 1.0 dB Vin=0.7Vp-p, f=30MHz/100kHz characteristics 1 6.75MHz LPF frequency Gf2675 -48 -30 dBVin=1.0Vp-p, f=27MHz/100kHz characteristics 2 13.5MHz LPF frequency Gf2135 -48 -30 dBVin=0.7Vp-p, f=54MHz/100kHz characteristics 2 30MHz LPF frequency Gf2300 -35 -20 dBVin=0.7Vp-p, f=74.25MHz/100kHz characteristics 2 MUTE attenuation MT -65 -55 dBVin=1.0Vp-p, f=4.43MHz Cross talk CT -65 -55 dBVin=1.0Vp-p, f=4.43MHz between channels PB/PR IN Zin 100 150 200 k input impedance Control pin VthH 2.0 VCC V input voltage = H Control pin VthL 0.0 0.8 V input voltage = L Control pin Rin 100 150 200 k input impedance Vin = 1.0 Vp-p, *2 Differential gain DG 0.5 % Standard stair-step signal input *2 Vin=1.0 Vp-p, Differential phase DP 0.5 deg Standard stair-step signal input *2 Vin = 1.0 Vp-p, band:100 kHz to 6 MHz S/N SN 75 dB 100% white video signal input *2 Indicates items with design certification (shipment inspections are not performed for these items.) www.rohm.com 2011.01 - Rev.A 2/24 2011 ROHM Co., Ltd. All rights reserved.