BH7616HFV-TR ROHM

1/4 Structure Silicon Monolithic Integrated Circuit Product name Video driver with LPF for mobile applications Model BH7616HFV Outer dimensions Fig HVSOF6 Plastic mold Function Output impedance becomes High at the time of standby. (1.5Megohm min) Built in 6dB AMP Built in LPF(8order) for Video input (f=4.5MHz) Sync Tip clamp circuit HVSOF6 small package Built in standby function STBY terminal Low ACTIVE High STANDBY Absolute maximum rating Ta=25) Parameter Symbol Rating Unit Supply voltage Vcc 7 V Power Dissipation Pd *410 mW Operating temperature range Topr -40 +85 Storage temperature range Tstg -55+125 For operation above 25 free-air temperature , power dissipation is decreasing 4.1mW/ in case mounting the ROHM standard grass-epoxy application board (70701.6mm) Operating voltage range Parameter Symbol Min. Std. Max. Unit Operating voltage range Vcc 2.6 3.0 5.5 This product is not designed to protect itself against radioactive rays. REV. C 2/4 Electrical characteristics (Ta=25VCC=3V unless otherwise specified) Specifications Parameter Symbol Unit Testing condition Min. Std. Max. ACTIVE I 7 11 A No Signal CC1 Circuit current STANBY I 0. 0 2 A CC2 Standby mode High Level I H 60 A 6pin=3.0V th Standby SW input current Voltage Low Level I L 4 A 6pin=0.2V th High Level V 1.2 V V Standby OFF thH cc Standby SW Change Voltage Low Level V 0 0.45 V Standby ON thL Voltage gain GV +5.5 +6.0 +6.5 dB Vin=100KHz, 1.0Vpp Maximum output level Vomv 2.2 2.6 Vpp f=10KHzTHD=1% 1 G -1.0 0.1 0.5 dB f=4.5MHz/100KHz f1 Frequency 2 G -7.0 -4.0 0.3 dB f=8.2MHz/100KHz f2 characteristics 3 G -45.0 dB f=19MHz/100KHz f3 Band 100KHz6MHz Y signal output SN -67.0 dB Terminal impedance 75 Y 100% White video signal Band 100Hz500KHz AM SN -77.0 dB CA C signal output Terminal impedance 75 PM SN -65.0 dB CP 100% chroma video signal Different Gain D 0.7 3.0 % G Vin= 1.0Vp-p Standard stair step signal Different Phase D 0.7 3.0 deg P Non-signal output terminal voltage V 0.2 0.4 V out Standby mode Z 1.5 M Supply Vout = 3V out output terminal impedance Control Terminal PARAMETER STATUS NOTE OPEN STANDBY STANDBY6PIN H STANDBY L ACTIVE Max1.8include.BURR Physical dimensions B G Lot No Fig HVSOF6 Plastic mold REV. C Max2.8 include.BURR