BM1383AGLV-EVK-001 ROHM

Users Guide Pressure Sensor BM1383AGLV-EVK-001 Manual BM1383AGLV-EVK-001 is an evaluation board for BM1383AGLV, which is a ROHM Pressure Sensor. This Users Guide is about how to use 1 BM1383AGLV-EVK-001 together with SensorShield* . *1 SensorShield is sold as Shield-EVK-001. Preparation Arduino Uno 1pc Personal Computer installed Arduino IDE 1pc Requirement : Arduino 1.6.7 or higher Please use Arduino IDE which can be downloaded from the link below: BM1383AGLV-EVK-001 Manual Users Guide 5. Check log of Serial Monitor (Figure 6) Measurement 1. Select Tools and check the contents enclosed in the red frame. (Figure 3) Board should be Arduino/Genuino Uno and Port should be COMxx (Arduino/Genuino Uno). COM port number is different in each environment. Figure 6. Serial Monitor Board Information Figure 3. COM Port setting 2. Write the program by pressing right arrow button for upload (Figure 4) 3. Wait for the message Done uploading (Figure 4) Figure 7. Picture of the board Figure 4. Uploading 4. Select Tools -> Serial Monitor (Figure 5) Table 1. Parts information Figure 5. Tools Setting 2018 ROHM Co., Ltd. No. 60UG062E Rev.001 2/2 Apr.2018