BU7245HFV-TR ROHM

Datasheet Operational Amplifiers Ultra Low Supply Current Input/Output Full Swing CMOS Operational Amplifier BU7245HFV BU7245SHFV General Description Key Specifications Operating Supply Voltage (single supply): The BU7245HFV is a low supply current and +1.8V to +5.5V input/output full swing CMOS operational amplifier. Supply Current: 5A(Typ) The BU7245SHFV has an expanded temperature Temperature Range: range. These features low operating supply voltage BU7245HFV -40C to +85C and low input bias current, suitable for battery-powered BU7245SHFV -40C to +105C equipment and sensor amplifiers. Input Offset Current: 1pA (Typ) Input Bias Current: 1pA (Typ) Features Ultra-low Supply Current Packages W(Typ) x D(Typ) x H(Max) Low Operating Supply Voltage HVSOF5 1.60mm x 1.60mm x 0.60mm Input/Output Full Swing Wide Operating Temperature Range (BU7245SHFV) Low Input Bias Current Applications Battery-powered Equipment Sensor Amplifiers Portable Equipment Consumer Equipment Pin Configuration BU7245HFV, BU7245SHFV: HVSOF5 Pin No. Pin Name IN+ 1 5 VDD 1 IN+ + 2 VSS 2 VSS - 3 IN- IN-3 4 OUT 4 OUT 5 VDD Package HVSOF5 BU7245HFV BU7245SHFV Ordering Information B U 7 2 4 5 x H F V - T R Part Number Package Packaging and forming specification BU7245HFV HFV : HVSOF5 TR: Embossed tape and reel BU7245SHFV Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0GMG0G200300-1-2 2014 ROHM Co., Ltd. All rights reserved. 1/18 21.Oct.2016 Rev.002 TSZ2211114001 Datasheet BU7245HFV BU7245SHFV Line-up Topr Package Orderable Part Number -40C to +85C HVSOF5 Reel of 3000 BU7245HFV-TR -40C to +105C HVSOF5 Reel of 3000 BU7245SHFV-TR Absolute Maximum Ratings (T =25C) A Rating Parameter Symbol Unit BU7245HFV BU7245SHFV Supply Voltage VDD-VSS +7 V (Note 1,2) Power Dissipation P HVSOF5 0.53 W D (Note 3) Differential Input Voltage V VDD - VSS V ID Input Common-mode Voltage Range V (VSS-0.3) to (VDD+0.3) V ICM (Note 4) Input Current I 10 mA I Operating Supply Voltage V +1.8 to +5.5 V opr Operating Temperature T -40 to +85 -40 to +105 C opr Storage Temperature T -55 to +125 C stg Maximum Junction Temperature T +125 C Jmax (Note 1) To use at temperature above T =25C reduce 5.3mW. A (Note 2) Mounted on a FR4 glass epoxy PCB 70mm70mm1.6mm (Copper foil area less than 3%). (Note 3) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VSS. (Note 4) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied. The input current can be set to less than the rated current by adding a limiting resistor. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0GMG0G200300-1-2 2014 ROHM Co., Ltd. All rights reserved. 2/18 21.Oct.2016 Rev.002 TSZ2211115001