Datasheet Operational Amplifiers Input/Output Full Swing Low Voltage Operation CMOS Operational Amplifiers BU7295HFV BU7295SHFV General Description Key Specifications BU7295HFV is an input/output full swing CMOS Operating Supply Voltage (Single Supply): operational amplifier. BU7295SHFV has an expanded +1.8V to +5.5V operating temperature range. They have low voltage Slew Rate: 1.0 V/s operation, low supply current and low input bias Operating Temperature: current. These are suitable for sensor amplifier and BU7295HFV -40C to +85C battery-powered equipment. BU7295SHFV -40C to +105C Input Offset Current: 1pA (Typ) Features Input Bias Current: 1pA (Typ) Low Operating Supply Voltage Input / Output Full Swing Low Input Bias Current Package W(Typ) x D(Typ) x H(Max) Wide Operating Temperature Range (BU7295SHFV) HVSOF5 1.60mm x 1.60mm x 0.60mm Applications Sensor Amplifier Battery-powered Equipment Portable Equipment Consumer Equipment Pin Configuration BU7295HFV, BU7295SHFV : HVSOF5 Pin No. Pin Name IN+ 1 5 VDD 1 IN+ 2 VSS + VSS 2 3 IN- - 4 OUT IN- 3 4 OUT 4 5 VDD Ordering Information B U 7 2 9 5 x x x x - T R Part Number Package Packaging and forming specification BU7295HFV HFV : HVSOF5 TR: Embossed tape and reel BU7295SHFV (HVSOF5) Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0RAR0G200210-1-2 2014 ROHM Co., Ltd. All rights reserved. 1/18 15.Jan.2014 Rev.001 TSZ2211114001 Datasheet BU7295HFV BU7295SHFV Line-up T Package Orderable Part Number opr -40C to +85C HVSOF5 Reel of 3000 BU7295HFV-TR -40C to +105C HVSOF5 Reel of 3000 BU7295SHFV-TR Absolute Maximum Ratings (T =25C) A Rating Parameter Symbol BU7295HFV BU7295SHFV Unit Supply Voltage VDD-VSS +7 V (Note 1,2) Power Dissipation P 0.53 W D (Note 3) Differential Input Voltage V VDD - VSS V ID Input Common-mode Voltage Range V (VSS-0.3) to (VDD+0.3) V ICM (Note 4) Input Current I 10 mA I Operating Supply Voltage V +1.8V to +5.5V V opr Operating Temperature T -40 to +85 -40 to +105 C opr Storage Temperature T -55 to +125 C stg Maximum Junction Temperature T +125 C Jmax (Note 1) To use at temperature above T =25C reduce 5.3 mW. A (Note 2) Mounted on a FR4 glass epoxy PCB 70mm70mm1.6mm (Copper foil area less than 3%) (Note 3) The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VSS. (Note 4) An excessive input current will flow when input voltages of more than VDD+0.6V or less than VSS-0.6V are applied. The input current can be set to less than the rated current by adding a limiting resistor. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0RAR0G200210-1-2 2014 ROHM Co., Ltd. All rights reserved. 2/18 15.Jan.2014 Rev.001 TSZ2211115001