RPM7237-H5R ROHM

RPM7237-R series Photo Link Module IR Receiver Module RPM7237-R series RPM7237-R series are remote control receiver module. Small-sized, light-weight, and low voltage operated (from 2.7V) modules have been achieved by using resin mold. z Center frequency 36.7kHz z Applications All household electric appliances such as TV, DVD, air conditioner and audio equipment. z Features 1) Low voltage operation. (VCC=2.7 to 3.6V) 2) Low current consumption. (ICC=0.3mA, VCC=3V) 3) Superior anti VCC noise characteristics. 4) 5 types of holders available to each set. z RPM7237-R series SIDE VIEW TOP VIEW Sub carrier frequency RSIP-A3 (H13) RSIP-A3 (H5) RSIP-A3 (H4) RSIP-A3 (H8) RSIP-A3 (H9) Height to lens 15.0mm 9.6mm 15.9mm 7.2mm 12.0mm RPM7237-H8R RPM7237-H9R 36.7kHz RPM7237-H13R RPM7237-H5R RPM7237-H4R Under development z Absolute maximum ratings (Ta = 25C) Parameter Symbol Limits Unit Supply Voltage VCC 6.3 V Output current IO 2.0 mA Storage temperature Tstg 30 to +100 C Operating temperature voltage Topr 10 to +75 C z Recommended operating conditions (Ta = 25C) Parameter Symbol Min. Typ. Max. Unit VCC 2.7 3.0 3.6 V Supply voltage Rev.B 1/6 RPM7237-R series Photo Link Module z Block diagram VCC 100k AMP LIMITER Detector Comparator ROUT BPF I / V GND z Terminal description Pin No. Pin name Function 1VOUT OUTPUT TERMINAL 2 GND GROUND POWER SUPPLY 3 VCC z Electrical, Optical characteristics (Unless otherwise noted, Ta = 25C VCC=3V) Parameter Symbol Min. Typ. Max. Unit Conditions Consumption Current ICC 300 500 A No outside light, No signal input L 1 Effective Distance 8 15 m Outer light condition Ee < 10 (Ix) VH 2.5 V High Level Output Voltage 1 < Low Level Output Voltage VL 0.5 V Isink 200A 1 = TON 400 1 ON Pulse Width 600 800 s Outer light condition Ee < 10 (Ix) OFF Pulse Width TOFF 400 600 800 s 1 Outer light condition Ee < 10 (Ix) Center frequency kHz fo 36.7 1/2 45 deg 2 Horizontal half angle 1/2 35 deg Vertical half angle 2 1 600/600s burst wave is transmitted by standard transmitter. However, it must be measured after the initial transmission pulse is 10 pulse. 2 It is an angle when the linear arrival distance become half. z Measurement Conditions (1) Transmit signal 600s 600s Carrier frequency=fo, Duty=50% Fig.1 Transmit signal Rev.B 2/6