RPM871-H14E2 ROHM

RPM871-H14 Photo Link Module IrDA Infrared communication Module RPM871-H14 RPM871-H14 is an infrared communication module for IrDA Ver. 1.2 (Low Power). The infrared LED, PIN photo diode, waveform shaping LSI are all integrated into a single package. This module is designed with power down function and low current consumption at stand-by mode. The ultra small package makes it a perfect fit for mobile devices. z Features 1) Applied to IrDA version 1.2. (Low Power) 2) Designed for low power consumption at stand-by for receiving (Typ.73A). 3) Suitable for sets driven by battery due to power down control function. 4) Power supply voltage range : 2.6V to 3.6V 5) Constant LED load resistance can change communication range. (Approx. 20 to 60cm) z Applications Cellular phones, PDAs, etc. z Absolute maximum ratings (Ta = 25C) Parameter Symbol Limits Unit Power supply voltage VCC 7.0 V Input voltage Vin 0.3 to VCC+0.3 V 1 Power dissipation Pd mW 150 Operating temperature range Topr 20 to +85 C Storage temperature range Tstg 30 to +100 C 2 LED peak current IFP mA 200 1 70mm70mm, t=1.6mm, glass epoxy mounting. Derating : 2mW/C for operation above Ta=25C 2 LED peak current<90s. ON duty<20% z Recommended operating conditions (Ta = 25C) Parameter Symbol Min. Unit Typ. Max. VCC 2.6 3.0 3.6 V Power supply voltage VLEDA 2.6 2.8 5.5 V 1/7 RPM871-H14 Photo Link Module z Block diagram and application circuit GND NC VCC VCC GND GND C1 PWDOWN POWER PWDOWN DOWN RXD RXD TXD TXD R1 LEDA (LEDVCC) LED DRIVER VCC (3pin) and VLEDA (8pin) can be used on either common power source or different one. 2/7 AMP AMP AMP 8 76543 2 1