Dear customer st LAPIS Semiconductor Co., Ltd. LAPIS Semiconducto), on the 1 day of October, 2020, implemented the incorporation-type company split (shinsetsu-bunkatsu) in which LAPIS established a new company, LAPIS Technology Co., Ltd. (LAPIS Technology) and LAPIS Technology succeeded LAPIS Semiconductors LSI business. Therefore, all references toLAPIS Semiconductor Co., Ltd,LAPIS Semiconducto and/orLAPI in this document shall be replaced withLAPIS Technology Co., Ltd Furthermore, there are no changes to the documents relating to our products other than the company name, the company trademark, logo, etc. Thank you for your understanding. LAPIS Technology Co., Ltd. October 1, 2020 Starter Kit for Ultra Low Power Microcontroller ML62Q1000 Capacitive Switch Starter Kit Start Guide Use with the U8/U16 Development Tools EASE1000 V2 This section will take you through the process of building the DTMF Sample Program, loading to the ML62Q1367 Capacitive Switch On-Chip Emulator Application Board and running. USB cable Interface cable Speaker USB cable PC USB cable (U8/U16 Development Tools EASE1000 V2 USB cable On-Chip Emulator BOTTOM TOP ML62Q1367 Capacitive Switch Application Board Figure 1 ML62Q1000 Capacitive Switch Starter Kit hardware configuration Use in a stand-alone Speaker The ML62Q1367 DTMF Tone Generator Sample Program (hereinafter DTMF Sample Program) is being written in the flash memory at the time of shipment. ML62Q1367 Capacitive Switch Application Board The following description applies to use in a stand-alone. Figure 5 Use with the U8/U16 Development Tools configuration USB cable 3. Copy of ML62Q1000 Capacitive Switch Starter Kit Software Package to your PC *1 AC USB power supply 3-1. Insert the ML62Q1000 Capacitive Switch Starter Kit Software Package DVD into the DVD drive of your PC. 3-2. Copy the ML62Q1000 CAP Switch StarterKit folder in the DVD to the C drives root folder (C: ) of your PC. Please copy the ML62Q1000 CAP Switch StarterKit folder to the folder the name of which is using half-width characters except space if you do not copy it to the C drives root folder (C: ) of your PC. Speaker 3-3. Eject the DVD from the DVD drive of your PC. ML62Q1367 Capacitive Switch Application Board 4. Installing of U8/U16 Development Tools Figure 2 Use in a stand-alone configuration This section will take you through the process of installing the U8/U16 Development Tools software, the Multiple Flash Writer, the Device Information Files and the EASE1000 V2 USB drivers. AC USB power supply are to be supplied by our customers. Please use Release 2.2.0 or later as the version of U8/U16 Development Tools. If you connect the ML62Q1367 Capacitive Switch Application Board to your PC by the USB cable, power is supplied to Operating environmentWindows 7*, Windows 8.1*, Windows 10* * 32-bit (x86) and 64-bit (x64) version. it. Please log on as an administrator account. When U8/U16 Development Tools existing in your PC, uninstall these programs at the beginning. 1. Connection and launch of the DTMF Sample Program For uninstallation, refer to Step 15. 1-1. As shown in figure 1 and figure 2, connect the speaker and the USB cable to the ML62Q1367 Capacitive Switch Application Board. 1-2. Connect the USB cable to power supply. 4-1. Extract the archives of the U8DevTool Rx xx x.zip in the ML62Q1000 CAP Switch StarterKit folder that you copied in The DTMF Sample Program will start, display LAPIS on the LCD and sound a beep. Step 3. * Rx xx x depends on the release version of the U8/U16 Development Tools. 4-2. Double-click the U8DevInstaller.exe file in the Setup folder into which you extracted the U8DevTool Rx xx x.zip. When this file is executed, the InstallShield Wizard will install the U8/U16 Development Tools software, the Multiple Flash Writer, the Device Information File and the EASE1000 V2 USB driver. Figure 3 Display of the LCD after starting Follow the instructions of the InstallShield wizard to install. 1-3. Touch a capacitive switch key of the ML62Q1367 Capacitive Switch Application Board. The DTMF Sample Program sounds a DTMF tone corresponding to a touched capacitive switch key and displays a character to Agree to SOFTWARE LICENSE AGREEMENT for SOFTWARE DEVELOPMENT TOOLS. on the LCD. Do not change option settings. Select Standard as Setup Type When the InstallShield Wizard displays the InstallShield Wizard Completed message box finally, close it. After that, installation has finished. Figure 4 Display example of the LCD after touching capacitive switch key TSW12 5. Connecting of the ML62Q1367 Capacitive Switch Application Board. 5-1. As shown in figure 1 and figure 5, connect the ML62Q1367 Capacitive Switch Application Board to the EASE1000 V2 On-Chip Emulator (hereinafter EASE1000). 2. Shut down 5-2. Connect the EASE1000 to PC using the USB cable. 2-1. Disconnect the USB cable from power supply. 5-3. Connect the speaker to the ML62Q1367 Capacitive Switch Application Board. 5-4. Connect the ML62Q1367 Capacitive Switch Application Board to PC using the USB cable. 6. Installing the DTMF Sample Program 6-1. Extract the archives of the CAP Switch SampleProgram Vxxx.zip in the ML62Q1000 CAP Switch StarterKit folder that you copied in Step 3.ML62Q1000 Capacitive Switch Starter Kit Sample Programs including the ML62Q1367 DTMF Tone Generator Sample Program will be extracted into the ML62Q1000 CAP Switch StarterKit CAP Switch SampleProgram Vxxx Software folder. * Vxxx depends on the version of the ML62Q1000 Capacitive Switch Starter Kit Sample Program Package.