Technical Data Sheet TNC 50 Straight Jack 56K107-106N5 All dimensions are in mm tolerances according to ISO 2768 m-H Interface According to IEC 60169-17, MIL-PRF-39012, DIN EN 122200 Documents Assembly instruction 51 P1 Material and plating Connector parts Material Plating Center contact CuBe AuroDur, gold plated Outer contact Brass Flash white bronze over silver(e.g. Optargen) Body Brass Flash white bronze over silver(e.g. Optargen) Dielectric PTFE Crimping ferrule Copper Flash white bronze over silver(e.g. Optargen) Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.com www.rosenberger.com 1 / 2 RFB00035/12.20/6.4 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet TNC 50 Straight Jack 56K107-106N5 Electrical data Impedance 50 Frequency DC to 10 GHz Return loss 33 dB, DC to 2.5 GHz 30 dB, 2.5 to 5 GHz 28 dB, 5 to 8 GHz Insertion loss 0.05 dB, DC to 8 GHz Insulation resistance 5 G Center contact resistance 1.5 m Outer contact resistance 1 m Test voltage 1500 V rms Working voltage 500 V rms Power handling (at 20 C, sea level, VSWR 1.0) 80 W 2 GHz - Limitations are possible due to the used cable type Mechanical data Mating cycles 500 Center contact captivation: axial 15 N Coupling test torque 1.7 Nm Recommended torque 0.46 Nm to 0.69 Nm Environmental data Temperature range -65 C to +165 C Thermal shock MIL-STD-202, Method 107, Condition B Corrosion MIL-STD-202, Method 101, Condition B Vibration MIL-STD-202, Method 204, Condition B Shock MIL-STD-202, Method 213, Condition G Moisture resistance MIL-STD-202, Method 106 RoHS compliant Tooling Crimping tool 11W150-000 Crimp insert 11W150-208 Suitable cables RG 141 /U, RG 58 C/U Weight Weight 13.7 g/pce While the information has been carefully compiled to the best of our knowledge, nothing is For the installation of the intended as representation or warranty on our part and no statement herein shall be electrotechnical equipment, construed as recommendation to infringe existing patents. In the effort to improve our particular electrotechnical products, we reserve the right to make changes judged to be necessary. expertise is required. Draft Date Approved Date Rev. Engineering change number Name Date Chr. Entsfellner 24.07.08 Chr. Janen 28.01.21 f00 20-1927 S. Huber-Siegl 28.01.21 Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.com www.rosenberger.com 2 / 2 RFB00035/12.20/6.4 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG