Technical Data Sheet TNC 50 Bulkhead Jack 56K607-106N5 All dimensions are in mm tolerances according to ISO 2768 m-H Interface According to IEC 60169-17, MIL-PRF-39012, DIN EN 122200 Documents Assembly instruction 51 P10 Panel piercing B 3 Material and plating Connector parts Material Plating Center contact CuBe AuroDur, gold plated Outer contact Brass Flash white bronze over silver(e.g. Optargen) Body Brass Flash white bronze over silver(e.g. Optargen) Dielectric PTFE Gasket Silicone Crimping ferrule Copper Flash white bronze over silver(e.g. Optargen) Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.com www.rosenberger.com 1 / 2 RFB00035/12.20/6.4 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet TNC 50 Bulkhead Jack 56K607-106N5 Electrical data Impedance 50 Frequency DC to 10 GHz Return loss 24 dB DC to 1 GHz 20 dB 1 GHz to 6 GHz Insertion loss 0.05 x f GHz dB, DC to 6 GHz Insulation resistance 5 G Center contact resistance 1.5 m Outer contact resistance 1 m Test voltage (at sea level) 1500 V rms Working voltage (at sea level) 500 V rms Power handling (at 20 C, sea level, VSWR 1.0) 80 W 2 GHz - Limitations are possible due to the used cable type - Mechanical data Mating cycles 500 Center contact captivation: axial 15 N Coupling test torque 1.7 Nm Recommended torque 0.46 Nm to 0.69 Nm Environmental data Temperature range -65 C to +165 C Thermal shock MIL-STD-202, Method 107, Condition B Corrosion MIL-STD-202, Method 101, Condition B Vibration MIL-STD-202, Method 204, Condition B Shock MIL-STD-202, Method 213, Condition G Moisture resistance MIL-STD-202, Method 106 Degree of protection (mated pair) IEC 60529, IP67 (assembled in housing) RoHS compliant Tooling Crimping tool 11W150-000 Crimp insert 11W150-208 Suitable cables RG 58 C/U, RG 141 /U Weight Weight 17 g/pce While the information has been carefully compiled to the best of our knowledge, nothing is For the installation of the intended as representation or warranty on our part and no statement herein shall be electrotechnical equipment, construed as recommendation to infringe existing patents. In the effort to improve our particular electrotechnical products, we reserve the right to make changes judged to be necessary. expertise is required. Draft Date Approved Date Rev. Engineering change number Name Date Inge Mhlauer 10.08.04 C. Janen 13.04.21 g00 21-0660 Fl. llerer 13.04.21 Rosenberger Hochfrequenztechnik GmbH & Co. KG Page Tel. : +49 8684 18-0 P.O.Box 1260 D-84526 Tittmoning Germany Email : info rosenberger.com www.rosenberger.com 2 / 2 RFB00035/12.20/6.4 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG