M9K102-199L Rosenberger

Technical Data Sheet Receptacle MultiMag 15 M9K102-199L (Solder Cup Termination) All dimensions are in mm tolerances according to ISO 2768 m-H General Information Magnetic connector Coding mechanical Number and type of contacts 15 rigid pins Soldering Solder cup for pre-tinned wire with cross section 0.25 mm Interface Mating with MultiMag 15 cable assembly Material and Plating Connector parts Material Plating Insulator PBT white, similar RAL 9003 Contact Brass AuroDur, gold plated Magnets NdFeB N52 Nickel Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel. : +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany Fax : +49 8684 18-499 www.rosenberger.de Email : info rosenberger.de 1 / 2 RF 35/05.10/6.0 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet Receptacle MultiMag 15 M9K102-199L (Solder Cup Termination) Flammability Rating Connector parts Category Insulator uncolored raw material acc. to UL94 V-0* *Please note that a non UL rated color batch is added Electrical Data Operating voltage 12 V Operating current max. 4.5 A max. 1.5 A per contact Contact resistance typically 60 m Impedance ~ 100 differential pairs Mechanical Data Mating cycles without load min. 10.000 Mating cycles under load min. 1.000 Magnetic retention force average ~ 14 N Environmental Data Temperature range -25 C to +65 C Magnets start losing their magnetic properties above 65 C Chemical resistance Isopropanol 70 % Compliance RoHS compliant Packing Standard 25 pcs in blister Weight ~ 16.4 g/pc Caution Magnets can impact the function of pace makers and implantable cardioverter- defibrillators (e.g. actuation of reed switch). Keep a minimum distance of 0.2 m (20 cm) between the magnetic connector and the implanted devices to prevent malfunction and danger to health. While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. Draft Date Approved Date Rev. Engineering change number Name Date H. Wurm 12.06.2015 T. Scheuerlein 18.02.2019 a00 19-s062 S. Doerr 18.02.2019 Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel. : +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany Fax : +49 8684 18-499 www.rosenberger.de Email : info rosenberger.de 2 / 2 RF 35/05.10/6.0 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG