Technical Data Sheet Adaptor (Bullet) WSMP W1K10J-K00D3 Female to Female All dimensions are in inches mm Unless otherwise specified: XXX .002 0,05 Interface According to Rosenberger WSMP Interface standards Material and plating Connector parts Material Plating Body and contact CuBe per ASTM B196 Hard gold, 50IN 1,27m min, over nickel, 50IN 1,27m min Dielectric PTFE per ASTM D1710 Rosenberger of North America, LLC Tel. : +1.717.859.8900 Page P.O. Box 309 Akron, PA USA 17501 Fax : +1.717.859.7044 www.rosenbergerna.com Email : info rosenbergerna.com 1 / 2 PROPRIETARY AND CONFIDENTIAL This data sheet is the property of Rosenberger of North America, LLC. By acceptance of this document you agree that all the rights to drawings, specifications, processes and other data therein, as well as the proprietary and novel features of the subject matter, are reserved by Rosenberger of North America, LLC and are disclosed in confidence. They are not to be manufactured, used, sold or disclosed to others, nor are devices embodying such features or information derived from these disclosures to be used or disclosed, unless and until expressly authorized by Rosenberger of North America, LLC. These drawings, specifications, processes, etc., are and remain the property of Rosenberger of North America, LLC, and are not to be copied or reproduced without permission. Technical Data Sheet Adaptor (Bullet) WSMP W1K10J-K00D3 Female to Female Electrical data Impedance 50 Frequency DC to 100 GHz Return loss (typical) 26 dB, DC to 26.5 GHz 19 dB, 26.5 to 65 GHz f(GHz) Insertion loss 0.12 x dB Insulation resistance 3,500 M Center contact resistance 6.0 m Outer contact resistance 2.0 m Test voltage (at sea level) 250 V rms RF High Potential (at sea level) 150 V rms 5 MHz RF leakage (typical mated pair) -80 dB Mechanical data Mating cycles - Full Detent 100 - Smooth Bore 500 Engagement force (typical) - Full Detent 2.5 lb 11 N f - Smooth Bore 1.2 lb 5.3 N f - Disengagement force (typical) - Full Detent 4.5 lb 20 N f - Smooth Bore 1.0 lb 4.5 N f Environmental data Temperature range -55C to +165C Thermal shock MIL-STD-202-107, Condition B Corrosion MIL-STD-202-101 Vibration MIL-STD-202-204, Condition D Shock MIL-STD-202-213, Condition I Moisture resistance MIL-STD-202-106, except Step 7B 2002/95/EC (RoHS) compliant Tooling Installation/Extraction tool W1W002-000 Packing Standard Draft Date Approved Date Rev. Engineering change number Name Date R. Hosler 11/1/13 M. Peeran 11/1/13 a02 Revised per 19-0674 P. Sill 5/16/2019 Rosenberger of North America, LLC Tel. : +1.717.859.8900 Page P.O. Box 309 Akron, PA USA 17501 Fax : +1.717.859.7044 www.rosenbergerna.com Email : info rosenbergerna.com 2 / 2 PROPRIETARY AND CONFIDENTIAL This data sheet is the property of Rosenberger of North America, LLC. By acceptance of this document you agree that all the rights to drawings, specifications, processes and other data therein, as well as the proprietary and novel features of the subject matter, are reserved by Rosenberger of North America, LLC and are disclosed in confidence. They are not to be manufactured, used, sold or disclosed to others, nor are devices embodying such features or information derived from these disclosures to be used or disclosed, unless and until expressly authorized by Rosenberger of North America, LLC. These drawings, specifications, processes, etc., are and remain the property of Rosenberger of North America, LLC, and are not to be copied or reproduced without permission.