Screw-hole punches Screw-hole punches with three-point cutting tip Die: three-point cutting tip Suitable for sheet steel, stainless-steel sheets, Mat. thickness: up to 4 mm non-ferrous and light metals, plastics. Ideal Material: special steel for switchgear manufacturers, electricians, Draw-in bolt: metric fine-threads, plumbers, industry and handicrafts. from MF 10 grade 12.9 Packing unit: 1.10 1.10 individual cartons No. 109 300 Through dimensions Draw-in bolt Article no. Price / each Article no. Price / each mm M + PG MF standard standard ball bearing ball bearing 12,7 M 12 / PG 7 MF 8 109 127 14,0 MF 8 109 140 15,2 PG 9 MF 10 109 152 109 152 K Cuts holes in thin materials quickly, easily, 16,0 MF 10 109 160 109 160 K cleanly and without burrs in a few simple 16,5 M 16 MF 10 109 165 109 165 K operations 17,0 MF 10 109 170 109 170 K 18,0 MF 10 109 180 109 180 K Three-point cut gives improved contact and 18,6 PG 11 MF 10 109 186 109 186 K thus less deformation of the punched parts, 19,0 MF 10 109 190 109 190 K preventing damage to the draw-in bolt 20,0 MF 10 109 200 109 200 K 20,4 M 20 / PG 3,5 MF 10 109 204 109 204 K The ball bearing between draw-in bolt and 21,0 MF 10 109 210 109 210 K die plate makes handling even simpler and 22,0 MF 10 109 220 109 220 K quicker, reducing the force required by 22,5 PG 16 MF 10 109 225 109 225 K approx. 67% 23,0 MF 10 109 230 109 230 K 24,0 MF 10 109 240 109 240 K Before the screw-hole punch is used, the 25,0 MF 10 109 250 109 250 K draw-in bolt should always be lubricated with 25,4 M 25 MF 10 109 254 109 254 K RUKO cutting spray or cutting paste 26,0 MF 10 109 260 109 260 K 27,0 MF 10 109 270 109 270 K The metric draw-in bolts of RUKO screw 28,3 PG 21 MF 12 109 283 109 283 K hole punches are always of the highest qua- 29,0 MF 12 109 290 109 290 K lity grade and are thus designed for extreme 30,0 MF 12 109 300 109 300 K loads. If lost, they can be replaced for short 31,0 MF 12 109 310 109 310 K periods of time by standard metric fine threa- 32,0 MF 12 109 320 109 320 K ded bolts 32,5 M 32 MF 12 109 325 109 325 K 33,0 MF 12 109 330 109 330 K Particularly suitable for use with spanners, 34,0 MF 12 109 340 109 340 K manual or foot-operated hydraulic punches 35,0 MF 12 109 350 109 350 K 36,0 MF 12 109 360 109 360 K Special sizes available on request 37,0 PG 29 MF 12 109 370 109 370 K 38,0 MF 12 109 380 109 380 K 39,0 MF 12 109 390 109 390 K 40,0 MF 12 109 400 109 400 K 40,5 M 40 MF 16 109 405 109 405 K 41,0 MF 16 109 410 109 410 K 42,0 MF 16 109 420 109 420 K 43,0 MF 16 109 430 109 430 K 44,0 MF 16 109 440 109 440 K 45,0 MF 16 109 450 109 450 K 46,0 MF 16 109 460 109 460 K 47,0 PG 36 MF 16 109 470 109 470 K 48,0 MF 16 109 480 109 480 K 49,0 MF 16 109 490 109 490 K 50,0 MF 16 109 500 109 500 K 50,5 M 50 MF 16 109 505 109 505 K 51,0 MF 16 109 510 109 510 K 52,0 MF 16 109 520 109 520 K 53,0 MF 16 109 530 109 530 K 54,0 PG 42 MF 16 109 540 109 540 K 55,0 MF 16 109 550 109 550 K No. 109 300 K 60,0 ~ PG 48 MF 16 109 600 109 600 K 63,5 M 63 MF 16 109 635 109 635 K - 193 -X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for ruko manufacturer: Other Similar products are found below : 214214 214100 214036 202040E 208040 214049 214053 214096 214140 101021 101062 232-040 102146 102303E 241 001 242-207 102114E 102411 245001 242-205 116048 102771 102785 244201 A215214RO A215215RO 217-020 214057 202030E 214034 214044 214081 215030 232025 237-030 241-010 241-101 244200 A214215RO 241 102 217-315 214047 208050 214062 230025 102-114 A101038 109220 270015 245002