MAAM-008863 FTTx RF Amplifier Rev. V5 50 - 1000 MHz Functional Schematic Features -8 dBm to +2 dBm Optical Input Range Low Equivalent Input Noise (EIN): 4.8 pA/rtHz 24 23 22 21 20 19 5 V Bias N/C 1 18 V A DD3 37 dB Gain Flat from 55 MHz to 1000 MHz 25 dB Gain Control Range RF A 2 17 RF A IN OUT 20 dBmV/ch Flat Output N/C 3 16 N/C Lead-Free 4 mm PQFN-24LD Plastic Package Atten N/C 4 15 N/C Halogen-Free Green Mold Compound RoHS* Compliant RF B 5 14 RF B IN OUT N/C 6 13 VDD3B Description 7 8 9 10 11 12 The MAAM-008863 provides high gain, low noise and low distortion amplification of the downstream CATV signal in fiber-to-the-home (FTTH) 3 applications. This device is ideally suited for Pin Configuration interfacing with the RF video output of optical Pin No. Pin Name Description triplexers used within optical network terminals 1 N/C No Connection (ONTs). 2 RF A RF Input A IN The MAAM-008863 is fabricated using MACOMs 3 N/C No Connection low noise GaAs pHEMT technology in a lead-free 4 4 N/C No Connection mm 24-lead package. The amplifier requires a 5 RF B RF Input B IN minimal number of off-chip components resulting in a highly integrated low cost solution. 6 N/C No Connection 7 N/C No Connection 8 V 1B 5 V Bias Voltage DD 9 V AGC Control Voltage: 0 V to 3 V AGC 10 N/C No Connection 11 V 2B 5 V Bias Voltage DD 12 N/C No Connection 1,2 Ordering Information 13 V 3B 5 V Bias Voltage DD Part Number Package 14 RF B RF Output B OUT 15 N/C No Connection MAAM-008863-TR1000 1000 Piece Reel 16 N/C No Connection MAAM-008863-TR3000 3000 Piece Reel 17 RF A RF Output A OUT MAAM-008863-002SMB Sample Test Board 18 V 3A 5 V Bias Voltage DD 1. Reference Application Note M513 for reel size information. 19 N/C No Connection 2. All sample kits include photodiode and 5 loose parts. 20 V 2A 5 V Bias Voltage DD 21 N/C No Connection 22 V 5 V AGC Bias Voltage DD AGC 23 V 1A 5 V Bias Voltage DD 24 N/C No Connection 25 Paddle RF and DC Ground * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAM-008863 FTTx RF Amplifier Rev. V5 50 - 1000 MHz 4 Electrical Specifications : T = 25C, V = 5 Volts, Z = 75 A DD 0 Parameter Test Conditions Units Min. Typ. Max. 50 MHz 36.2 38.2 40.2 Gain AGC = 3 V 870 MHz dB 36.9 38.9 40.9 1000 MHz 36.8 38.8 40.8 50 MHz 36.3 38.3 40.3 Gain AGC = 1.3 V 870 MHz dB 37.4 39.4 41.4 1000 MHz 34.9 36.9 38.9 50 MHz 35.5 37.5 39.5 Gain AGC = 1 V 870 MHz dB 35.0 37.0 39.0 1000 MHz 34.8 36.8 38.8 50 MHz 23.5 26.0 28.5 Gain AGC = 0.5 V 870 MHz dB 23.9 26.4 28.9 1000 MHz 23.3 25.8 28.3 50 MHz 10.3 12.3 14.3 Gain AGC = 0 V 870 MHz dB 11.5 13.5 15.5 1000 MHz 11.8 13.8 15.8 Gain Tilt Within AGC control voltage range dB - 0 - AGC Control Voltage Range V 0 - 3 EIN pA/rtHz - 4.8 - Output Return Loss dB - 16 - 5 CTB 79 channels dBc - -61 - 5 CSO 79 channels dBc - -62 - Current Consumption 5 V V mA - 220 250 DD 4. Performance is specified using JDSU Photodiode EPM-745 or equivalent (EPM705) and output balun MABA-009210-CT1760. 5. OMI = 3.5% P = 20 dBmV/ch Optical input power range: -8 dBm to +2 dBm. OUT 6,7 Absolute Maximum Ratings Parameter Absolute Maximum Handling Procedures Input Power 3 dBm Optical Please observe the following precautions to avoid damage: Operating Voltage 15 volts AGC Voltage 5 volts Static Sensitivity Operating Temperature -40C to +85C Gallium Arsenide Integrated Circuits are sensitive 8,9 Junction Temperature +150C to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control Storage Temperature -65C to +150C techniques should be used when handling these 6. Exceeding any one or combination of these limits may cause devices. permanent damage to this device. 7. MACOM does not recommend sustained operation near these survivability limits. 8. Operating at nominal conditions with T +150C will ensure J 6 MTTF > 1 x 10 hours. 9. Junction Temperature (T ) = T + jc * ((V * I) - (P - P )) J C OUT IN Typical thermal resistance ( jc) = 19C/W. a) For T = 25C, C T = 46 C 5 V, 220 mA J b) For T = 85C, C T = 106 C 5 V, 220 mA J 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: