REVISION A NOTES: A ANY REV. MADE TO THIS PRINT MUST HAVE AN UPDATED MKT PRINT 1. CONNECTOR HEIGHT NOT AVAILABLE AS STANDARD. 2. REPRESENTS A CRITICAL DIMENSION.C 3. CONTACT TO BE FLUSH .002 0.05 TO BE MEASURED AT ALL 4 CORNERS. C DO NOT MEASURE ON THE BREAK-OFF SURFACE. 4. PARTS TO BE PACKAGED IN TAPE & REEL. FOR QUANTITIES LESS THAN 125 PCS, NO TRAILER OR LEADER WILL BE SUPPLIED. 5. NOTE DELETED. 6. MINIMUM PUSHOUT FORCE: .5 LB DO NOT 7. ONE REEL MINIMUM PLATING REQUIREMENT (85,000 CONTACTS PER REEL). SCALE FROM 8. ALL DIMS TO BE SYMMETRICAL ABOUT THE CENTERLINE WITHIN .001 0.03 . THIS PRINT 9. MAXIMUM VARIATION BETWEEN SOLDERBALLS: .0025 0.064 10. REFER TO VISUAL INSPECTION BOARD FOR SOLDERBALL APPEARANCE CHECKS. 11. THE DISTANCE FROM THE CENTER OF ANY SOLDERBALL TO THE CENTER OF ANY ADJACENT INNER PEG SHALL BE .025.005 0.640.13 . 12. SOLDER JOINTS TO BE INSPECTED PER IPC SPECIFICATION 12.2.12 (IPC-A-610C). 1.070 27.18 REF .970 24.64 REF (19 POSITIONS x .050 1.27 ) + .020 0.51 .9000.0020 22.8600.051 C 19 01 A B C .250 6.35 .095 2.41 .145 3.68 .320 8.13 REF C L D E F C .035 0.89 REF L .308.020 7.820.51 .354 8.99 C REF .017.020 0.430.51 .190.003 4.830.08 4 2 .160 4.06 REF 1 .188 4.78 .183 4.65 REF 3 .050 1.27 (TYP) .007 0.18 .050 1.27 (TYP) (SEE NOTE 9) SECTION PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 0.3 2 ITEM NO. PART NUMBER QUANTITY MATERIAL 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 0.051 WRITTEN CONSENT OF SAMTEC, INC. 1 ASP-167045-01-B 1.0000 LCP, COLOR: BLACK e-Mail info SAMTEC.com code 55322 DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: 2 ASP-190171-02-P-H-SUB 114.00 PHOS BRONZE PLATING: LEAD FREE VITA ASSEMBLY CONTACT AREA: .000030 GOLD OVER .000050 NICKEL C 3 SDB-030-9653 114.00 96.5% Sn /3% Ag/.5% Cu REMAINDER: .000003 GOLD OVER .000050 NICKEL DWG. NO. ASP-189983-02 4 K-DOT-.354-.469-.005 1.0000 POLYIMIDE FILM c: enterprisevault DWG MISC MKTG ASP-189983-02-MKT.SLDDRW BY: J. BROWNING 11/04/2015 SHEET OF1 2 5 CT-ASP1949MS .00222 CONDUCTIVE POLYMERREVISION A .900 22.86 (19 POSITIONS x .050 1.27 ) 19 .630 16.00 REF 01 A B C .250 6.35 D 02 E F 01 B 1.732 44.00 REF .0250 0.635 .0100 0.254 TRACE .0310 0.787 (FREE OF SOLDER) 45 .0250 0.635 PAD USER DIRECTION OF UN-REELING POCKET NOT DETAILED .0100 0.254 VIA .0200 0.51 PAD (PLATED) 5 DETAIL B RECOMMENDED MAIN BOARD LAYOUT PACKAGING VIEW .900 22.86 19 .025 0.64 .050 1.27 (TYP) 01 A B C .250 6.35 D E F PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, RECOMMENDED STENCIL LAYOUT INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 STENCIL TO BE .006 0.152 THICK REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: SHEET SCALE: 3:1 LEAD FREE VITA ASSEMBLY DWG. NO. ASP-189983-02 c: enterprisevault DWG MISC MKTG ASP-189983-02-MKT.SLDDRWBY: J. BROWNING 11/04/2015 SHEET OF2 2