COST-EFFECTIVE & DUAL WIPE SOCKETS 8 Gbps (2.00 mm) .0787 PITCH TLE/CLT SERIES TLE NO. PINS PLATING OPTION Mates: TLE 1 01 DV - PER ROW - - OPTION - - TMMH, TMM, MTMM, MMT, TW, LTMM, ZLTMM, TCMD, TSH 02 thru 50 G A = 10 (0.25 m) = Alignment Pin Gold (3 positions minimum) CLT Mates: K TMM, TMMH, MTMM, = (5.00 mm) .197 DIA MMT, TW, TSH Polyimide Film Pick & Place Pad No. of positions x (3 positions minimum) (2.00) .0787 SPECIFICATIONS P = Metal Pick & Place Pad (4.00) TLE (4 positions minimum) .157 Insulator Material: Black Liquid Crystal Polymer TR Contact Material: = Tape & Reel Packaging A Option Phosphor Bronze (2-37 positions only) Plating: Au over 50 (1.27 m) Ni -FR Current Rating (TLE/TMMH): = Full Reel Tape & Reel (4.32) 3.2 A per pin (4.50) (must order maximum .170 (2 pins powered) .177 quantity per reel contact Operating Temp Range: P Option Samtec for quantity breaks) -55 C to +125 C (5.51) (2-37 positions only) Insertion Depth: .217 (2.08 mm) .082 to (4.37 mm) .172 with (0.38 mm) .015 wipe, pass-through, or (3.35 mm) .132 min for bottom entry NO. PINS LEAD PLATING OTHER CLT 1 D - PER ROW - STYLE - OPTION - - OPTIONS CLT Same as TLE except: Plating: Sn or Au over 50 (1.27 m) Ni All options require 02 thru 50 01 F Current Rating (TMMH/CLT): Style 02 = Through- = Gold flash 4.1 A per pin hole on contact, (2 pins powered) BE Matte Tin on tail Insertion Depth: = Bottom Entry Top Entry= 02 (Required for bottom (1.40 mm) .055 minimum = Surface L entry applications) Bottom Entry= Mount = 10 (0.25 m) (2.57 mm) .101 minimum ALSO AVAILABLE Gold on contact, (add board thickness for A Matte Tin on tail 03 correct post OAL) = Alignment Pin Other Platings = Through- Max Cycles: (3 positions minimum) (MOQ Required) hole G 100 with 10 (0.25 m) Au Metal or plastic at = 10 (0.25 m) No. of positions x Samtecs discretion Gold on contact, (2.00) .0787 Gold flash on tail PROCESSING K = (5.00 mm) .197 DIA (4.00) Polyimide Film TLE .157 Pick & Place Pad LeadFree Solderable: (04 thru 50 only) Yes SMT Lead Coplanarity: (2.13) (0.10 mm) .004 max (02-26) P .084 (0.15 mm) .006 max (27-50)* = Pick & Place Pad *(.004 stencil solution (4 positions minimum) (2.27) may be available contact (Not always necessary .090 ipg samtec.com) for auto placement.) (5.16) A CLT A Option .203 Same as TLE except: (3.02) TR SMT Lead Coplanarity: .119 02 = Tape & Reel (0.10 mm) .004 max (02-25) (36 positions max) 01 or 03 (0.15 mm) .006 max (26-34)* (0.20 mm) .008 max (35-50)* FR *(.004 stencil solution = Full Reel Tape & Reel LEAD STYLE A may be available contact (must order maximum P Option ipg samtec.com) quantity per reel 01 (2.16) .085 contact Samtec for Note: 03 (2.95) .116 quantity breaks) Some lengths, styles and (36 positions max) options are non-standard, non-returnable. F-221 Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Board to Board & Mezzanine Connectors category: Click to view products by Samtec manufacturer: Other Similar products are found below : 589158040000018 MDF7C-18P-2.54DSA(55) FCN-230C068-11 FCN-268F012-G/BD FCN-268F036-G/BD FCN-268M012-G/0D FCN- 268M024-G/1D FCN-723J004/1 MIS-048-01-F-D-DP-K 832-10-034-10-001000 FX4C-80S-1.27DSA FCN-214Q030-G/0 FCN-234P048-G/0 FCN-235D050-G/C 210-93-314-41-105000 2-22603-0 MDF7-40DP-2.54DSA(55) AXG720047 5031084030 MIT-114-03-F-D-K 55323- 1519 DF33-2P-3.3DSA(24) YFT-20-05-H-03-SB-K 503308-3040 026-6203-PDB 027-6203-PDB 069159702701000 10123981-102LF 101A10019X 55650-0588-C 68684-306 75140-7012 589159005003045 194261-1 FCN-268F024-G0D 10124054-515LF 68685-603 8- 1616154-3 MIS-019-01-F-D 589159005002045 541371078 IL-WX-10PB-HF-B-E1000E FCN-268M024-G/3D 20021832-06016C1LF KX15-20KLDL-E1000E MDF7-16DP-2.54DSA(55) AXE810124 FCN-214J100-G/0 FCN-230C068-E/S AXE812124